Global Attributes
Name	Value
comment	CF metadata, OzFlux standard variable names
Flag35	GapFilling: Gap Filled by Replacement
Functions	,do_linear, TaFromTv, CalculateMetVars, CoordRotation2D, CalculateFluxes, FhvtoFh,RangeCheck,do_qcchecks
tower_height	2.25m
site_name	Dargo High Plains
Flag34	GapFilling: Gap Filled by Interpolation
Flag62	Penman-Monteith: bad Fe < threshold (0 W/m2 default) only if bad Fsd (34) flag not set
soil	Alpine humus
Flag61	Penman-Monteith: bad rst (rst < 0) only if bad Uavg (35), bad Fe (33) and bad Fsd (34) flags not set
Flag37	GapFilling: u* not from Fh
Flag64	Penman-Monteith: Uavg == 0 (undefined aerodynamic resistance under calm conditions) only if bad Fe (33) and bad Fsd (34) flags not set
Flag7	QA/QC: Excluded Hours
Flag6	QA/QC: Excluded Dates
Flag5	QA/QC: L2 Diurnal SD Check
Flag4	QA/QC: LI7500 Diagnostic
references	None
Flag2	QA/QC: L2 Range Check
Flag1	QA/QC: -9999 in level 1 dataset
Flag0	Good data
time_step	30
site_pi	Robert Simpson
EPDversion	2.7.3 | 64-bit | (default, Aug 8 2013, 05:30:12) [MSC v.1500 64 bit (AMD64)]
coverage_flux_L3	54
nc_nrecs	17520
end_date	2014-01-01 00:00:00
title	Dargo High Plains flux data for the 2013 calendar year
Flag32	GapFilling: Met Gap Filled from Climatology
coverage_meteorology_L3	66
xl_datemode	0
Flag52	albedo: bad time flag (not midday 10.00 to 14.00)
Flag51	albedo: bad Fsd < threshold (290 W/m2 default) only if bad time flag (31) not set
Flag63	Penman-Monteith: bad Fsd < threshold (10 W/m2 default)
latitude	37 08 00.4S
QC_version	OzFluxQC V2.7.0
coverage_soil_L3	72
start_date	2013-01-01 00:30:00
vegetation	Subalpine Grassland
xl_moddatetime	2014-07-29 13:28:45
featureType	timeseries
data_url	http://ozflux.its.monash.edu.au/
Flag36	GapFilling: u* from Fh
Flag31	GapFilling: Flux Gap not Filled by ANN
Flag30	GapFilling: Flux Gap Filled by ANN (SOLO)
Flag19	Corrections/Combinations: Gap coordination
Flag18	Corrections/Combinations: u* filter
Flag17	Corrections/Combinations: L3 Diurnal SD Check
Flag70	Partitioning Night: Re computed from exponential temperature response curves
Flag15	Corrections/Combinations: Ta from Tv
Flag14	Corrections/Combinations: WPL correction for flux effects on density measurements (Coord Rotation, Massman, Fhv to Fh, Cc_7500_Av)
Flag13	Corrections/Combinations: Virtual to Actual Fh (Coord Rotation, Massman, Ta_HMP)
Flag12	Corrections/Combinations: Massman Frequency Attenuation Correction (Coord Rotation, Tv_CSAT, Ah_HMP, ps)
Flag11	Corrections/Combinations: Coordinate Rotation (Ux, Uy, Uz, UxT, UyT, UzT, UxA, UyA, UzA, UxC, UyC, UzC, UxUz, UxUx, UxUy, UyUz, UxUy, UyUy)
Flag33	GapFilling: Gap Filled from Ratios
Flag80	Partitioning Day: GPP/Re computed from light-response curves, GPP = Re - Fc
Flag39	GapFilling: L4 Diurnal SD Check
Flag82	Partitioning Day: Fc > Re, GPP = 0, Re = Fc
Flag81	Partitioning Day: GPP night mask
nc_level	L3
canopy_height	0.05m
institution
ozflux_url	http://ozflux.org.au/
xl_filename	../Sites/Dargo/Data/Processed/2013/Dargo_2013_L0.xls
nc_rundatetime	2014-07-30 10:21:50
doi	DOI:????
Flag16	Corrections/Combinations: L3 Range Check
Flag38	GapFilling: L4 Range Check
Flag10	Corrections: Apply Linear
longitude	147 10 15.3E
coverage_radiation_L3	66
contact	
license_url	http://www.tern.org.au/datalicence/TERN-BY-SA-NC/1.0
source	
license_type	TERN-BY-SA-NC
Flag3	QA/QC: CSAT Diagnostic
metadata_url	http://http://www.ozflux.org.au/monitoringsites/<site_name>/index.html
history	V2.1 August 2012 - post OzFlux Methven meet
Variables
double	Ah [Time=17520]
long_name =	"Merged from Ah_HMP_2m, Ah_7500_Av"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"g/m3"
serial_number =	"not defined"
valid_range =	"0,35"
rangecheck_upper =	"[35]*12"
rangecheck_lower =	"[0]*12"
int	Ah_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Cc [Time=17520]
long_name =	"Merged from Cc_7500_Av"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"54"
units =	"mg/m3"
serial_number =	"not defined"
valid_range =	"250,900"
rangecheck_upper =	"[900]*12"
rangecheck_lower =	"[250]*12"
int	Cc_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
int	Day [Time=17520]
long_name =	"Day"
ancillary_variables =	"not defined"
height =	"not defined"
coverage_L2 =	"100"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"100"
units =	"none"
serial_number =	"not defined"
double	Day_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Fa [Time=17520]
long_name =	"Available energy using Fn,Fg"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"W/m2"
serial_number =	"not defined"
int	Fa_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Fc [Time=17520]
long_name =	"converted to umol/m2/s"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"49"
units =	"umol/m2/s"
serial_number =	"not defined"
valid_range =	"-50,50"
rangecheck_upper =	"[50]*12"
rangecheck_lower =	"[-50]*12"
int	Fc_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Fe [Time=17520]
instrument =	"not defined"
ancillary_variables =	"not defined"
height =	"not defined"
long_name =	"WPL corrected Fe"
standard_name =	"surface_upward_latent_heat_flux"
coverage_L3 =	"51"
units =	"W/m2"
serial_number =	"not defined"
valid_range =	"-100,600"
rangecheck_upper =	"[600]*12"
rangecheck_lower =	"[-100]*12"
double	Fe_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Fg [Time=17520]
long_name =	"Element-wise average of series Fg_8cma, Fg_8cmb"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"W/m2"
serial_number =	"not defined"
valid_range =	"-300,300"
rangecheck_upper =	"[300]*12"
rangecheck_lower =	"[-300]*12"
int	Fg_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Fh [Time=17520]
long_name =	"Sensible heat flux from virtual heat flux"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"surface_upward_sensible_heat_flux"
coverage_L3 =	"50"
units =	"W/m2"
serial_number =	"not defined"
valid_range =	"-100,600"
rangecheck_upper =	"[600]*12"
rangecheck_lower =	"[-100]*12"
int	Fh_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Fld [Time=17520]
long_name =	"Down-welling long wave\""
ancillary_variables =	"Fld QC flag"
height =	"3.5m"
coverage_L2 =	"52"
instrument =	"Kipp and Zonen CNR4"
standard_name =	"surface_downwelling_longwave_flux_in_air"
coverage_L3 =	"52"
units =	"W/m2"
serial_number =	""
valid_range =	"250,700"
rangecheck_upper =	"[700]*12"
rangecheck_lower =	"[250]*12"
int	Fld_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Flu [Time=17520]
long_name =	"Up-welling long wave"
ancillary_variables =	"Flu QC flag"
height =	"3.5m"
coverage_L2 =	"65"
instrument =	"Kipp and Zonen CNR4"
standard_name =	"surface_upwelling_longwave_flux_in_air"
coverage_L3 =	"65"
units =	"W/m2"
serial_number =	""
valid_range =	"300,700"
rangecheck_upper =	"[700]*12"
rangecheck_lower =	"[300]*12"
int	Flu_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Fm [Time=17520]
long_name =	"Momentum flux, rotated to natural wind coordinates"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"60"
units =	"kg/m/s2"
serial_number =	"not defined"
valid_range =	"-1,1"
rangecheck_upper =	"[1]*12"
rangecheck_lower =	"[-1]*12"
int	Fm_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Fn [Time=17520]
long_name =	"Merged from Fn_CNR1"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"W/m2"
serial_number =	"not defined"
valid_range =	"-150,1100"
rangecheck_upper =	"[1100]*12"
rangecheck_lower =	"[-150]*12"
int	Fn_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Fsd [Time=17520]
long_name =	"Down-welling short wave"
ancillary_variables =	"Fsd QC flag"
height =	"3.5m"
coverage_L2 =	"72"
instrument =	"Kipp and Zonen CNR4"
standard_name =	"surface_downwelling_shortwave_flux_in_air"
coverage_L3 =	"72"
units =	"W/m2"
serial_number =	""
valid_range =	"-10,1500"
rangecheck_upper =	"[1500]*12"
rangecheck_lower =	"[-10]*12"
int	Fsd_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Fsu [Time=17520]
long_name =	"Up-welling short wave"
ancillary_variables =	"Fsu QC flag"
height =	"3.5m"
coverage_L2 =	"72"
instrument =	"Kipp and Zonen CNR4"
standard_name =	"surface_upwelling_shortwave_flux_in_air"
coverage_L3 =	"72"
units =	"W/m2"
serial_number =	""
valid_range =	"-10,500"
rangecheck_upper =	"[500]*12"
rangecheck_lower =	"[-10]*12"
int	Fsu_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Hdh [Time=17520]
long_name =	"Decimal hour of the day"
ancillary_variables =	"not defined"
height =	"not defined"
coverage_L2 =	"100"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"100"
units =	"none"
serial_number =	"not defined"
double	Hdh_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
int	Hour [Time=17520]
long_name =	"Hour"
ancillary_variables =	"not defined"
height =	"not defined"
coverage_L2 =	"100"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"100"
units =	"none"
serial_number =	"not defined"
double	Hour_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
int	Minute [Time=17520]
long_name =	"Minute"
ancillary_variables =	"not defined"
height =	"not defined"
coverage_L2 =	"100"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"100"
units =	"none"
serial_number =	"not defined"
double	Minute_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
int	Month [Time=17520]
long_name =	"Month"
ancillary_variables =	"not defined"
height =	"not defined"
coverage_L2 =	"100"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"100"
units =	"none"
serial_number =	"not defined"
double	Month_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	PARdd [Time=17520]
long_name =	"Downwelling Diffuse PAR"
ancillary_variables =	"PARdd_Avg QC flag"
height =	"3.5m"
coverage_L2 =	"72"
instrument =	"DeltaT BF3"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"umol/m2"
serial_number =	""
valid_range =	"-10,3000"
rangecheck_upper =	"[3000]*12"
rangecheck_lower =	"[-10]*12"
int	PARdd_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	PARgd [Time=17520]
long_name =	"Downwelling Global PAR"
ancillary_variables =	"PARgd_Avg QC flag"
height =	"3.5m"
coverage_L2 =	"72"
instrument =	"DeltaT BF3"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"umol/m2"
serial_number =	""
valid_range =	"-10,3000"
rangecheck_upper =	"[3000]*12"
rangecheck_lower =	"[-10]*12"
int	PARgd_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	PARgu [Time=17520]
long_name =	"Up-welling Global PAR"
ancillary_variables =	"PARgu_Avg QC flag"
height =	"3.5m"
coverage_L2 =	"72"
instrument =	"LiCor Li-190"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"umol/m2"
serial_number =	""
valid_range =	"-10,1500"
rangecheck_upper =	"[1500]*12"
rangecheck_lower =	"[-10]*12"
int	PARgu_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Precip [Time=17520]
long_name =	"Rainfall, 30 minute total"
ancillary_variables =	"Precip QC flag"
height =	"0.3m"
coverage_L2 =	"72"
instrument =	"Hydrological Services CS7000"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"mm"
serial_number =	""
valid_range =	"0,50"
rangecheck_upper =	"[50]*12"
rangecheck_lower =	"[0]*12"
int	Precip_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
int	Second [Time=17520]
long_name =	"Second"
ancillary_variables =	"not defined"
height =	"not defined"
coverage_L2 =	"100"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"100"
units =	"none"
serial_number =	"not defined"
double	Second_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Sws10 [Time=17520]
long_name =	"Element-wise average of series Sws_10cma, Sws_10cmb, Sws_10cmc"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"frac"
serial_number =	"not defined"
valid_range =	"0,0.85"
rangecheck_upper =	"[0.85]*12"
rangecheck_lower =	"[0]*12"
int	Sws10_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Sws20 [Time=17520]
long_name =	"Element-wise average of series Sws_20cma"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"frac"
serial_number =	"not defined"
valid_range =	"0,0.85"
rangecheck_upper =	"[0.85]*12"
rangecheck_lower =	"[0]*12"
int	Sws20_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Sws30 [Time=17520]
long_name =	"Element-wise average of series Sws_30cma"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"frac"
serial_number =	"not defined"
valid_range =	"0,0.85"
rangecheck_upper =	"[0.85]*12"
rangecheck_lower =	"[0]*12"
int	Sws30_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Sws50 [Time=17520]
long_name =	"Element-wise average of series Sws_50cma"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"frac"
serial_number =	"not defined"
valid_range =	"0,0.85"
rangecheck_upper =	"[0.85]*12"
rangecheck_lower =	"[0]*12"
int	Sws50_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	SwsAll [Time=17520]
units =	"frac"
long_name =	"Element-wise average of series Sws_10cma, Sws_10cmb, Sws_10cmc, Sws_20cma, Sws_30cma, Sws_50cma"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
serial_number =	"not defined"
valid_range =	"0,0.85"
rangecheck_upper =	"[0.85]*12"
rangecheck_lower =	"[0]*12"
int	SwsAll_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Ta [Time=17520]
long_name =	"Merged from Ta_HMP_2m, Tv_CSAT"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"C"
serial_number =	"not defined"
valid_range =	"-20,50"
rangecheck_upper =	"[50]*12"
rangecheck_lower =	"[-20]*12"
int	Ta_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Ts10 [Time=17520]
long_name =	"Element-wise average of series Ts_10cma"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"C"
serial_number =	"not defined"
valid_range =	"-5,60"
rangecheck_upper =	"[60]*12"
rangecheck_lower =	"[-5]*12"
int	Ts10_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Ts15 [Time=17520]
long_name =	"Element-wise average of series Ts_15cma"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"C"
serial_number =	"not defined"
valid_range =	"-5,60"
rangecheck_upper =	"[60]*12"
rangecheck_lower =	"[-5]*12"
int	Ts15_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Ts20 [Time=17520]
long_name =	"Element-wise average of series Ts_20cma"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"71"
units =	"C"
serial_number =	"not defined"
valid_range =	"-5,60"
rangecheck_upper =	"[60]*12"
rangecheck_lower =	"[-5]*12"
int	Ts20_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Ts30 [Time=17520]
long_name =	"Element-wise average of series Ts_30cma"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"C"
serial_number =	"not defined"
valid_range =	"-5,60"
rangecheck_upper =	"[60]*12"
rangecheck_lower =	"[-5]*12"
int	Ts30_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Ts40 [Time=17520]
long_name =	"Element-wise average of series Ts_40cma"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"C"
serial_number =	"not defined"
valid_range =	"-5,60"
rangecheck_upper =	"[60]*12"
rangecheck_lower =	"[-5]*12"
int	Ts40_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	Ts50 [Time=17520]
long_name =	"Element-wise average of series Ts_50cma"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"C"
serial_number =	"not defined"
valid_range =	"-5,60"
rangecheck_upper =	"[60]*12"
rangecheck_lower =	"[-5]*12"
int	Ts50_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Ts8 [Time=17520]
long_name =	"Element-wise average of series Ts_8cma, Ts_8cmb"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"C"
serial_number =	"not defined"
valid_range =	"-5,60"
rangecheck_upper =	"[60]*12"
rangecheck_lower =	"[-5]*12"
int	Ts8_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	TsAll [Time=17520]
long_name =	"Element-wise average of series Ts_8cma, Ts_8cmb"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"72"
units =	"C"
serial_number =	"not defined"
valid_range =	"-5,60"
rangecheck_upper =	"[60]*12"
rangecheck_lower =	"[-5]*12"
int	TsAll_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Wd [Time=17520]
long_name =	"Merged from Wd_CSAT"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"61"
units =	"deg"
serial_number =	"not defined"
valid_range =	"0,360"
rangecheck_upper =	"[360]*12"
rangecheck_lower =	"[0]*12"
int	Wd_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	Ws [Time=17520]
long_name =	"Merged from Ws_CSAT"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"61"
units =	"m/s"
serial_number =	"not defined"
valid_range =	"0,30"
rangecheck_upper =	"[30]*12"
rangecheck_lower =	"[0]*12"
int	Ws_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
int	Year [Time=17520]
long_name =	"Year"
ancillary_variables =	"not defined"
height =	"not defined"
coverage_L2 =	"100"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"100"
units =	"none"
serial_number =	"not defined"
double	Year_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"
double	eta [Time=17520]
long_name =	"Horizontal rotation angle"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"61"
units =	"deg"
serial_number =	"not defined"
int	eta_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	ps [Time=17520]
long_name =	"Air pressure, average"
ancillary_variables =	"ps QC flag"
height =	"2.25m"
coverage_L2 =	"72"
instrument =	"LiCor Li-7500"
standard_name =	"surface_air_pressure"
coverage_L3 =	"72"
units =	"kPa"
serial_number =	""
valid_range =	"75,105"
rangecheck_upper =	"[105]*12"
rangecheck_lower =	"[75]*12"
int	ps_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	theta [Time=17520]
long_name =	"Vertical rotation angle"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"61"
units =	"deg"
serial_number =	"not defined"
int	theta_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	ustar [Time=17520]
long_name =	"Friction velocity, rotated to natural wind coordinates"
ancillary_variables =	"not defined"
height =	"not defined"
instrument =	"not defined"
standard_name =	"not defined"
coverage_L3 =	"60"
units =	"m/s"
serial_number =	"not defined"
valid_range =	"0,2"
rangecheck_upper =	"[2]*12"
rangecheck_lower =	"[0]*12"
int	ustar_QCFlag [Time=17520]
units =	"none"
long_name =	"QC flag"
double	xlDateTime [Time=17520]
units =	"days since 1899-12-31 00:00:00 +9:30"
coverage_L3 =	"100"
cf_role =	"timeseries_id"
coverage_L2 =	"100"
long_name =	"Date/time in Excel format"
standard_name =	"not defined"
int	xlDateTime_QCFlag [Time=17520]
long_name =	"QC flag"
units =	"none"