| Global Attributes |
| Name |
Value |
| coverage_flux_L3 |
84 |
| comment |
CF metadata, OzFlux standard variable names |
| Flag00 |
Good data |
| Functions |
,do_linear, TaFromTv, CalculateMetVars, CoordRotation2D, CalculateFluxes, FhvtoFh, CorrectFgForStorage,RangeCheck,do_qcchecks,DiurnalCheck |
| tower_height |
30 |
| site_name |
CUP_EC |
| Flag05 |
QA/QC: L2 Diurnal SD Check |
| Flag20 |
GapFilling: Driver gap filled using ACCESS |
| Flag01 |
QA/QC: Missing value in L1 dataset |
| Flag08 |
QA/QC: Missing value found with QC flag = 0 |
| soil |
|
| Flag60 |
GapFilling: Flux gap filled using ratios |
| Flag02 |
QA/QC: L2 Range Check |
| irga_type |
li7500 |
| Flag03 |
QA/QC: CSAT Diagnostic |
| references |
None |
| longitude |
150.723611 |
| time_step |
30 |
| site_pi |
Elise |
| EPDversion |
2.7.10 |Anaconda 2.3.0 (64-bit)| (default, May 28 2015, 16:44:52) [MSC v.1500 64 bit (AMD64)] |
| nc_nrecs |
3553 |
| Flag06 |
QA/QC: Excluded Dates |
| title |
Flux tower data set from the CUP site for 2012 |
| Flag21 |
GapFilling: Used non-rotated covariance |
| SwsSeries |
['Sws'] |
| elevation |
|
| source |
30m flux tower plus array of soil sensors |
| coverage_meteorology_L3 |
98 |
| Flag50 |
GapFilling: Gap filled by interpolation |
| Flag19 |
Corrections/Combinations: Gap coordination |
| metadata_url |
http://http://www.ozflux.org.au/monitoringsites/CumberlandPlain/index.html |
| latitude |
-33.615278 |
| license_url |
http://www.tern.org.au/datalicence/TERN-BY-SA-NC/1.0 |
| coverage_radiation_L3 |
95 |
| coverage_soil_L3 |
64 |
| start_date |
2012-10-19 00:00:00 |
| vegetation |
Dry sclerophyll forest |
| FgDepth |
0.08 |
| Flag07 |
QA/QC: Excluded Hours |
| featureType |
timeseries |
| data_url |
http://data.ozflux.org.au/ |
| OrganicContent |
0.05 |
| Flag30 |
GapFilling: Flux gap filled by ANN (SOLO) |
| end_date |
2013-01-01 00:00:00 |
| Flag18 |
Corrections/Combinations: u* filter |
| Flag17 |
Corrections/Combinations: L3 Diurnal SD Check |
| Flag16 |
Corrections/Combinations: L3 Range Check |
| Flag15 |
Corrections/Combinations: Ta from Tv |
| Flag14 |
Corrections/Combinations: WPL correction for flux effects on density measurements (Coord Rotation, Massman, Fhv to Fh, Cc_7500_Av) |
| Flag13 |
Corrections/Combinations: Virtual to Actual Fh (Coord Rotation, Massman, Ta_HMP) |
| Flag12 |
Corrections/Combinations: Massman Frequency Attenuation Correction (Coord Rotation, Tv_CSAT, Ah_HMP, ps) |
| Flag11 |
Corrections/Combinations: Coordinate Rotation (Ux, Uy, Uz, UxT, UyT, UzT, UxA, UyA, UzA, UxC, UyC, UzC, UxUz, UxUx, UxUy, UyUz, UxUy, UyUy) |
| canopy_height |
23 m |
| Flag39 |
GapFilling: L4 Diurnal SD Check |
| Flag31 |
GapFilling: Flux gap not filled by ANN |
| xl_moddatetime |
2015-11-09 15:10:09 |
| Flag10 |
Corrections: Apply Linear |
| xl_datemode |
0 |
| xl_filename |
../Sites/CUP/2012/CUP_2012_L1.xls |
| QC_version |
OzFluxQC V2.9.5 |
| nc_rundatetime |
2015-12-03 18:39:02 |
| doi |
DOI:???? |
| controlfile_name |
C:/OzFlux/OzFluxQC/controlfiles/CUP/2012/L3.txt |
| Flag04 |
QA/QC: LI7500 Diagnostic |
| Flag38 |
GapFilling: L4 Range Check |
| institution |
HIE, UWS |
| time_zone |
Australia/Sydney |
| nc_level |
L3 |
| contact |
e.pendall@uws.edu.au |
| Flag40 |
GapFilling: Gap filled by climatology |
| license_type |
TERN-BY-SA-NC |
| ozflux_url |
http://ozflux.org.au/ |
| BulkDensity |
1900 |
| SwsDefault |
0.08 |
| history |
V2.9.4 Aug 2015 |
| Variables |
| double | time [time=3553] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"time" |
| standard_name = |
"time" |
| units = |
"days since 1800-01-01 00:00:00.0" |
| calendar = |
"gregorian" |
| double | latitude [latitude=1] |
| long_name = |
"latitude" |
| standard_name = |
"latitude" |
| units = |
"degrees north" |
| _Netcdf4Dimid = |
1 |
| double | longitude [longitude=1] |
| _Netcdf4Dimid = |
2 |
| long_name = |
"longitude" |
| standard_name = |
"longitude" |
| units = |
"degrees east" |
| int | Day [time=3553, latitude=1, longitude=1] |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"100" |
| long_name = |
"Day" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"none" |
| coverage_L3 = |
"100" |
| missing_value = |
-9999 |
| int | Day_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"DayQC flag" |
| units = |
"none" |
| double | Ddd [time=3553, latitude=1, longitude=1] |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"100" |
| long_name = |
"Decimal day of the year" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"none" |
| coverage_L3 = |
"100" |
| missing_value = |
-9999.0 |
| int | Ddd_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"DddQC flag" |
| double | Hdh [time=3553, latitude=1, longitude=1] |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"100" |
| long_name = |
"Decimal hour of the day" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"none" |
| coverage_L3 = |
"100" |
| missing_value = |
-9999.0 |
| int | Hdh_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"HdhQC flag" |
| units = |
"none" |
| int | Hour [time=3553, latitude=1, longitude=1] |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"100" |
| long_name = |
"Hour" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"none" |
| coverage_L3 = |
"100" |
| missing_value = |
-9999 |
| int | Hour_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"HourQC flag" |
| units = |
"none" |
| int | Minute [time=3553, latitude=1, longitude=1] |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"100" |
| long_name = |
"Minute" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"none" |
| coverage_L3 = |
"100" |
| missing_value = |
-9999 |
| int | Minute_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"MinuteQC flag" |
| units = |
"none" |
| int | Month [time=3553, latitude=1, longitude=1] |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"100" |
| long_name = |
"Month" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"none" |
| coverage_L3 = |
"100" |
| missing_value = |
-9999 |
| int | Month_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"MonthQC flag" |
| units = |
"none" |
| int | Second [time=3553, latitude=1, longitude=1] |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"100" |
| long_name = |
"Second" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"none" |
| coverage_L3 = |
"100" |
| missing_value = |
-9999 |
| int | Second_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"SecondQC flag" |
| int | Year [time=3553, latitude=1, longitude=1] |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"100" |
| long_name = |
"Year" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"none" |
| coverage_L3 = |
"100" |
| missing_value = |
-9999 |
| int | Year_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"YearQC flag" |
| double | xlDateTime [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| units = |
"days since 1899-12-31 00:00:00 +9:30" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L2 = |
"100" |
| cf_role = |
"timeseries_id" |
| long_name = |
"Date/time in Excel format" |
| int | xlDateTime_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"xlDateTimeQC flag" |
| units = |
"none" |
| double | AGC_7500 [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Li-7500" |
| ancillary_variables = |
"AGC_7500 QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"99" |
| long_name = |
"Li-7500 automatic gain control" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"none" |
| coverage_L3 = |
"99" |
| valid_range = |
"0,82" |
| rangecheck_upper = |
"[82]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | AGC_7500_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"AGC_7500QC flag" |
| units = |
"none" |
| double | Ah [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"HMP45C" |
| ancillary_variables = |
"Ah_HMP_<30>m QC flag" |
| valid_range = |
"0,22" |
| coverage_L2 = |
"53" |
| long_name = |
"Absolute humidity, average, merged from Ah_HMP_30m, Ah_7500_Av, Ah_HMP_7m" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"g/m3" |
| coverage_L3 = |
"99" |
| height = |
"30m" |
| rangecheck_upper = |
"[22]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ah_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"AhQC flag" |
| units = |
"none" |
| double | AhAh [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Li-7500" |
| ancillary_variables = |
"AhAh QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"98" |
| long_name = |
"Absolute humidity, variance" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"(g/m3)2" |
| coverage_L3 = |
"98" |
| valid_range = |
"0,100" |
| rangecheck_upper = |
"[100]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | AhAh_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"AhAhQC flag" |
| double | Ah_7500_Av [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Li-7500" |
| ancillary_variables = |
"Ah_7500 QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"95" |
| long_name = |
"Absolute humidity, average" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"g/m3" |
| coverage_L3 = |
"95" |
| valid_range = |
"0,30" |
| rangecheck_upper = |
"[30]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ah_7500_Av_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Ah_7500_AvQC flag" |
| units = |
"none" |
| double | Ah_7500_Sd [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"98" |
| long_name = |
"Absolute humidity from Li-7500, standard deviation" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"g/m3" |
| coverage_L3 = |
"98" |
| valid_range = |
"0,10" |
| rangecheck_upper = |
"[10]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ah_7500_Sd_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Ah_7500_SdQC flag" |
| units = |
"none" |
| double | Ah_HMP_30m [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"HMP45C" |
| ancillary_variables = |
"Ah_HMP_<30>m QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"53" |
| long_name = |
"Absolute humidity, average" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"g/m3" |
| coverage_L3 = |
"53" |
| valid_range = |
"0,30" |
| rangecheck_upper = |
"[30]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ah_HMP_30m_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Ah_HMP_30mQC flag" |
| double | Ah_HMP_7m [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"HMP45C" |
| ancillary_variables = |
"Ah_HMP_01 QC flag" |
| height = |
"7m" |
| coverage_L2 = |
"99" |
| long_name = |
"Absolute humidity, average" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"g/m3" |
| coverage_L3 = |
"99" |
| valid_range = |
"0,30" |
| rangecheck_upper = |
"[30]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ah_HMP_7m_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Ah_HMP_7mQC flag" |
| units = |
"none" |
| double | C_ppm [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"98" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"CO2 concentration" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"umol/mol" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | C_ppm_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"C_ppmQC flag" |
| units = |
"none" |
| double | Cc [time=3553, latitude=1, longitude=1] |
| height = |
"30m" |
| long_name = |
"CO2 concentration, average, merged from Cc_7500_Av, converted to umol/mol" |
| ancillary_variables = |
"Cc_7500 QC flag" |
| serial_number = |
"" |
| valid_range = |
"370,900" |
| coverage_L2 = |
"98" |
| instrument = |
"Li-7500" |
| standard_name = |
"mole_concentration_of_carbon_dioxide_in_air" |
| diurnalcheck_numsd = |
"[3]*12" |
| units = |
"umol/mol" |
| coverage_L3 = |
"96" |
| missing_value = |
-9999.0 |
| rangecheck_upper = |
"[900]*12" |
| rangecheck_lower = |
"[370]*12" |
| int | Cc_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"CcQC flag" |
| units = |
"none" |
| double | CcCc [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Li-7500" |
| ancillary_variables = |
"CcCc QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"94" |
| long_name = |
"CO2 concentration, variance" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"(mg/m3)2" |
| coverage_L3 = |
"94" |
| valid_range = |
"0,2500" |
| rangecheck_upper = |
"[2500]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | CcCc_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"CcCcQC flag" |
| double | Cc_7500_Av [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Li-7500" |
| ancillary_variables = |
"Cc_7500 QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"98" |
| long_name = |
"CO2 concentration, average" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"mg/m3" |
| coverage_L3 = |
"98" |
| valid_range = |
"500,2000" |
| rangecheck_upper = |
"[2000]*12" |
| rangecheck_lower = |
"[500]*12" |
| int | Cc_7500_Av_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Cc_7500_AvQC flag" |
| double | Cc_7500_Sd [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"98" |
| long_name = |
"CO2 concentration from Li-7500, standard deviation" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"mg/m3" |
| coverage_L3 = |
"98" |
| valid_range = |
"0,2000" |
| rangecheck_upper = |
"[2000]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Cc_7500_Sd_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Cc_7500_SdQC flag" |
| units = |
"none" |
| double | Cpd [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"91" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Specific heat capacity of dry air" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"J/kg-K" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Cpd_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"CpdQC flag" |
| double | Cpm [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Specific heat capacity of moist air" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"J/kg-K" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Cpm_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"CpmQC flag" |
| units = |
"none" |
| double | Cpw [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Specific heat capacity of water vapour" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"J/kg-K" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Cpw_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"CpwQC flag" |
| units = |
"none" |
| double | Cs [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"100" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Specific heat capacity" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"J/m3/K" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Cs_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"CsQC flag" |
| units = |
"none" |
| double | Diag_7500 [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Li-7500" |
| ancillary_variables = |
"Diag_7500 QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"99" |
| long_name = |
"Li-7500 diagnostic value" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"none" |
| coverage_L3 = |
"99" |
| valid_range = |
"-0.5,10.5" |
| rangecheck_upper = |
"[10.5]*12" |
| rangecheck_lower = |
"[-0.5]*12" |
| int | Diag_7500_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Diag_7500QC flag" |
| double | Diag_CSAT [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT" |
| ancillary_variables = |
"Diag_CSAT QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"CSAT diagnostic value" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"none" |
| coverage_L3 = |
"91" |
| valid_range = |
"-0.5,3000" |
| rangecheck_upper = |
"[3000]*12" |
| rangecheck_lower = |
"[-0.5]*12" |
| int | Diag_CSAT_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Diag_CSATQC flag" |
| units = |
"none" |
| double | Fa [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"89" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Available energy using Fn,Fg" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"W/m2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Fa_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"FaQC flag" |
| units = |
"none" |
| double | Fc [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| long_name = |
"WPL corrected Fc, converted to umol/m2/s" |
| ancillary_variables = |
"not defined" |
| serial_number = |
"not defined" |
| height = |
"30m" |
| instrument = |
"not defined" |
| standard_name = |
"surface_upward_mole_flux_of_carbon_dioxide" |
| diurnalcheck_numsd = |
"[3]*12" |
| units = |
"umol/m2/s" |
| coverage_L3 = |
"79" |
| valid_range = |
"-40,20" |
| rangecheck_upper = |
"[20]*12" |
| rangecheck_lower = |
"[-40]*12" |
| int | Fc_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"FcQC flag" |
| units = |
"none" |
| double | Fc_storage [time=3553, latitude=1, longitude=1] |
| long_name = |
"Fc infered from CO2 storage using single point CO2 measurement, converted to umol/m2/s" |
| coverage_L3 = |
"97" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| instrument = |
"not defined" |
| standard_name = |
"not defined" |
| units = |
"umol/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Fc_storage_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Fc_storageQC flag" |
| units = |
"none" |
| double | Fe [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| serial_number = |
"not defined" |
| height = |
"30m" |
| long_name = |
"WPL corrected Fe" |
| standard_name = |
"surface_upward_latent_heat_flux" |
| diurnalcheck_numsd = |
"[3]*12" |
| units = |
"W/m2" |
| coverage_L3 = |
"83" |
| valid_range = |
"-50,500" |
| rangecheck_upper = |
"[500]*12" |
| rangecheck_lower = |
"[-50]*12" |
| int | Fe_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"FeQC flag" |
| units = |
"none" |
| double | Fe_raw [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"87" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Fe (uncorrected for WPL)" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"W/m2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Fe_raw_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Fe_rawQC flag" |
| units = |
"none" |
| double | Fg [time=3553, latitude=1, longitude=1] |
| height = |
"not defined" |
| long_name = |
"Soil heat flux corrected for storage" |
| ancillary_variables = |
"not defined" |
| serial_number = |
"not defined" |
| valid_range = |
"-40,150" |
| coverage_L2 = |
"99" |
| instrument = |
"not defined" |
| standard_name = |
"downward_heat_flux_in_soil" |
| diurnalcheck_numsd = |
"[3]*12" |
| units = |
"W/m2" |
| coverage_L3 = |
"95" |
| missing_value = |
-9999.0 |
| rangecheck_upper = |
"[150]*12" |
| rangecheck_lower = |
"[-40]*12" |
| int | Fg_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"FgQC flag" |
| units = |
"none" |
| double | Fg_8cma [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Huskeflux HFP01" |
| ancillary_variables = |
"Fg_8cma QC flag" |
| height = |
"-0.08m" |
| coverage_L2 = |
"99" |
| long_name = |
"Ground heat flux, sensor 1a" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"W/m2" |
| coverage_L3 = |
"99" |
| valid_range = |
"-60,100" |
| rangecheck_upper = |
"[100]*12" |
| rangecheck_lower = |
"[-60]*12" |
| int | Fg_8cma_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Fg_8cmaQC flag" |
| double | Fg_Av [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Soil heat flux uncorrected for storage" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"W/m2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Fg_Av_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Fg_AvQC flag" |
| units = |
"none" |
| double | Fh [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| serial_number = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Sensible heat flux from virtual heat flux" |
| standard_name = |
"surface_upward_sensible_heat_flux" |
| diurnalcheck_numsd = |
"[3]*12" |
| units = |
"W/m2" |
| coverage_L3 = |
"80" |
| valid_range = |
"-100,600" |
| rangecheck_upper = |
"[600]*12" |
| rangecheck_lower = |
"[-100]*12" |
| int | Fh_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"FhQC flag" |
| units = |
"none" |
| double | Fhv [time=3553, latitude=1, longitude=1] |
| long_name = |
"Virtual heat flux, rotated to natural wind coordinates" |
| coverage_L3 = |
"91" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| instrument = |
"not defined" |
| standard_name = |
"not defined" |
| units = |
"W/m2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Fhv_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"FhvQC flag" |
| units = |
"none" |
| double | Fld [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Kipp and Zonen CNR4" |
| ancillary_variables = |
"Fld QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"99" |
| long_name = |
"Down-welling long wave\"" |
| standard_name = |
"surface_downwelling_longwave_flux_in_air" |
| serial_number = |
"" |
| units = |
"W/m2" |
| coverage_L3 = |
"99" |
| valid_range = |
"250,700" |
| rangecheck_upper = |
"[700]*12" |
| rangecheck_lower = |
"[250]*12" |
| int | Fld_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"FldQC flag" |
| double | Flu [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Kipp and Zonen CNR4" |
| ancillary_variables = |
"Flu QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"99" |
| long_name = |
"Up-welling long wave" |
| standard_name = |
"surface_upwelling_longwave_flux_in_air" |
| serial_number = |
"" |
| units = |
"W/m2" |
| coverage_L3 = |
"99" |
| valid_range = |
"300,700" |
| rangecheck_upper = |
"[700]*12" |
| rangecheck_lower = |
"[300]*12" |
| int | Flu_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"FluQC flag" |
| units = |
"none" |
| double | Fm [time=3553, latitude=1, longitude=1] |
| long_name = |
"Momentum flux, rotated to natural wind coordinates" |
| coverage_L3 = |
"90" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| instrument = |
"not defined" |
| standard_name = |
"not defined" |
| units = |
"kg/m/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Fm_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"FmQC flag" |
| units = |
"none" |
| double | Fn [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Calculated net radiation using Fsd,Fsu,Fld,Flu, merged from Fn_KZ, Fn_NR" |
| standard_name = |
"surface_net_downwawrd_radiative_flux" |
| serial_number = |
"not defined" |
| units = |
"W/m2" |
| coverage_L3 = |
"89" |
| valid_range = |
"-150,1100" |
| rangecheck_upper = |
"[1100]*12" |
| rangecheck_lower = |
"[-150]*12" |
| int | Fn_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"FnQC flag" |
| units = |
"none" |
| double | Fn_KZ [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"89" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Calculated net radiation using Fsd,Fsu,Fld,Flu" |
| standard_name = |
"surface_net_downwawrd_radiative_flux" |
| instrument = |
"not defined" |
| units = |
"W/m2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Fn_KZ_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Fn_KZQC flag" |
| double | Fn_NR [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| ExcludeHours_0 = |
"[\'2012-10-19 00:00\',\'2012-12-31 23:30\',[\'13:30\',\'14:00\',\'14:30\',\'15:00\',\'15:30\']]" |
| instrument = |
"Hukseflux NR01" |
| ancillary_variables = |
"Fn_NR QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"89" |
| long_name = |
"Net radiation" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"W/m2" |
| coverage_L3 = |
"89" |
| valid_range = |
"-100,1000" |
| rangecheck_upper = |
"[1000]*12" |
| rangecheck_lower = |
"[-100]*12" |
| int | Fn_NR_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Fn_NRQC flag" |
| units = |
"none" |
| double | Fsd [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| ExcludeHours_0 = |
"[\'2012-10-19 00:00\',\'2012-12-31 23:30\',[\'13:30\',\'14:00\',\'14:30\',\'15:00\',\'15:30\']]" |
| instrument = |
"Kipp and Zonen CNR4" |
| ancillary_variables = |
"Fsd QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"89" |
| long_name = |
"Down-welling short wave" |
| standard_name = |
"surface_downwelling_shortwave_flux_in_air" |
| serial_number = |
"" |
| units = |
"W/m2" |
| coverage_L3 = |
"89" |
| valid_range = |
"-10,1500" |
| rangecheck_upper = |
"[1500]*12" |
| rangecheck_lower = |
"[-10]*12" |
| int | Fsd_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"FsdQC flag" |
| units = |
"none" |
| double | Fsu [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Kipp and Zonen CNR4" |
| ancillary_variables = |
"Fsu QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"99" |
| long_name = |
"Up-welling short wave" |
| standard_name = |
"surface_upwelling_shortwave_flux_in_air" |
| serial_number = |
"" |
| units = |
"W/m2" |
| coverage_L3 = |
"99" |
| valid_range = |
"-10,500" |
| rangecheck_upper = |
"[500]*12" |
| rangecheck_lower = |
"[-10]*12" |
| int | Fsu_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"FsuQC flag" |
| units = |
"none" |
| double | H_ppt [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"H2O concentration" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"mmol/mol" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | H_ppt_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"H_pptQC flag" |
| units = |
"none" |
| double | Lv [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Latent heat of vapourisation" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"J/kg" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Lv_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"LvQC flag" |
| units = |
"none" |
| double | Precip [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Hydrological Services CS7000" |
| ancillary_variables = |
"Precip QC flag" |
| height = |
"0.6m" |
| coverage_L2 = |
"100" |
| long_name = |
"Rainfall, 30 minute total" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"mm" |
| coverage_L3 = |
"100" |
| valid_range = |
"0,50" |
| rangecheck_upper = |
"[50]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Precip_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"PrecipQC flag" |
| units = |
"none" |
| double | RH [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Relative humidity" |
| standard_name = |
"relative_humidity" |
| instrument = |
"not defined" |
| units = |
"%" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | RH_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"RHQC flag" |
| units = |
"none" |
| double | RhoCp [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"91" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Product of air density and specific heat capacity" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"J/m3-K" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | RhoCp_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"RhoCpQC flag" |
| units = |
"none" |
| int | S_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"SQC flag" |
| units = |
"none" |
| double | SHD [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Specific humidity deficit" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"kg/kg" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | SHD_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"SHDQC flag" |
| units = |
"none" |
| double | Sws [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Campbell Scientific CS616" |
| ancillary_variables = |
"Sws_01 QC flag" |
| valid_range = |
"0,0.7" |
| coverage_L2 = |
"0" |
| long_name = |
"Soil water fraction, sensor 1a, element-wise average of series Sws_8cma, Sws_20cma, Sws_8cmb" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"frac" |
| coverage_L3 = |
"0" |
| height = |
"-<.08m" |
| rangecheck_upper = |
"[0.7]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"SwsQC flag" |
| double | Sws_20cma [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Campbell Scientific CS616" |
| ancillary_variables = |
"Sws_03 QC flag" |
| height = |
"-0.08m vertically" |
| coverage_L2 = |
"0" |
| long_name = |
"Soil water fraction, sensor 3" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"frac" |
| coverage_L3 = |
"0" |
| valid_range = |
"0,0.9" |
| rangecheck_upper = |
"[0.9]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_20cma_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Sws_20cmaQC flag" |
| units = |
"none" |
| double | Sws_20cmb [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Campbell Scientific CS616" |
| ancillary_variables = |
"Sws_04 QC flag" |
| height = |
"-0.08m vertically" |
| coverage_L2 = |
"0" |
| long_name = |
"Soil water fraction, sensor 4" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"frac" |
| coverage_L3 = |
"0" |
| valid_range = |
"0,0.9" |
| rangecheck_upper = |
"[0.9]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_20cmb_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Sws_20cmbQC flag" |
| units = |
"none" |
| double | Sws_8cma [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Campbell Scientific CS616" |
| ancillary_variables = |
"Sws_01 QC flag" |
| height = |
"-<.08m" |
| coverage_L2 = |
"0" |
| long_name = |
"Soil water fraction, sensor 1a" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"frac" |
| coverage_L3 = |
"0" |
| valid_range = |
"0,0.6" |
| rangecheck_upper = |
"[0.6]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_8cma_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Sws_8cmaQC flag" |
| units = |
"none" |
| double | Sws_8cmb [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Campbell Scientific CS616" |
| ancillary_variables = |
"Sws_02 QC flag" |
| height = |
"-0.08m horizontally in soil next to heat flux plate" |
| coverage_L2 = |
"0" |
| long_name = |
"Soil water fraction, sensor 2" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"frac" |
| coverage_L3 = |
"0" |
| valid_range = |
"0,0.6" |
| rangecheck_upper = |
"[0.6]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_8cmb_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Sws_8cmbQC flag" |
| units = |
"none" |
| double | Sws_Calc [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Campbell Scientific CS616" |
| ancillary_variables = |
"Sws_Calc QC flag" |
| height = |
"-0.08m vertically" |
| coverage_L2 = |
"100" |
| long_name = |
"Soil water fraction, calculated from EucFACE_R6" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"frac" |
| coverage_L3 = |
"100" |
| valid_range = |
"0,0.6" |
| rangecheck_upper = |
"[0.6]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_Calc_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Sws_CalcQC flag" |
| units = |
"none" |
| double | Ta [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"HMP45C" |
| ancillary_variables = |
"Ta_HMP_01 QC flag" |
| valid_range = |
"-5,50" |
| coverage_L2 = |
"99" |
| long_name = |
"Air temperature, average, merged from Ta_HMP_30m, Ta_CSAT, Ta_HMP_7m" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"C" |
| coverage_L3 = |
"99" |
| height = |
"30m" |
| rangecheck_upper = |
"[50]*12" |
| rangecheck_lower = |
"[-5]*12" |
| int | Ta_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"TaQC flag" |
| units = |
"none" |
| double | Ta_CSAT [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"91" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Ta calculated from Tv using Tv_CSAT" |
| standard_name = |
"air_temperature" |
| instrument = |
"not defined" |
| units = |
"C" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Ta_CSAT_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Ta_CSATQC flag" |
| double | Ta_HMP_30m [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"HMP45C" |
| ancillary_variables = |
"Ta_HMP_01 QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"99" |
| long_name = |
"Air temperature, average" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"C" |
| coverage_L3 = |
"99" |
| valid_range = |
"-3,50" |
| rangecheck_upper = |
"[50]*12" |
| rangecheck_lower = |
"[-3]*12" |
| int | Ta_HMP_30m_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Ta_HMP_30mQC flag" |
| double | Ta_HMP_7m [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"HMP45C" |
| ancillary_variables = |
"Ta_HMP_<height>m QC flag" |
| height = |
"7m" |
| coverage_L2 = |
"99" |
| long_name = |
"Air temperature, average" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"C" |
| coverage_L3 = |
"99" |
| valid_range = |
"-3,50" |
| rangecheck_upper = |
"[50]*12" |
| rangecheck_lower = |
"[-3]*12" |
| int | Ta_HMP_7m_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Ta_HMP_7mQC flag" |
| units = |
"none" |
| double | Tpanel [time=3553, latitude=1, longitude=1] |
| instrument = |
"Campbell Scientific CR3000 logger" |
| ancillary_variables = |
"None" |
| coverage_L2 = |
"99" |
| long_name = |
"Panel temperature at logger" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"C" |
| coverage_L3 = |
"99" |
| missing_value = |
-9999.0 |
| int | Tpanel_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"TpanelQC flag" |
| units = |
"none" |
| double | Ts [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Campbell Scientific TCAV" |
| ancillary_variables = |
"Ts_8cma QC flag" |
| valid_range = |
"0,60" |
| coverage_L2 = |
"99" |
| long_name = |
"Soil temperature, sensor 1a, element-wise average of series Ts_8cma" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"C" |
| coverage_L3 = |
"99" |
| height = |
"-0.08m" |
| rangecheck_upper = |
"[60]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ts_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"TsQC flag" |
| units = |
"none" |
| double | Ts_0cma [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Campbell Scientific TCAV" |
| ancillary_variables = |
"Ts_01d QC flag" |
| height = |
"not in soil" |
| coverage_L2 = |
"99" |
| long_name = |
"Soil temperature, sensor 4, not in soil" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"C" |
| coverage_L3 = |
"99" |
| valid_range = |
"0,60" |
| rangecheck_upper = |
"[60]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ts_0cma_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Ts_0cmaQC flag" |
| units = |
"none" |
| double | Ts_20cma [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Campbell Scientific TCAV" |
| ancillary_variables = |
"Ts_01b QC flag" |
| height = |
"-0.07m, -0.14m, -0.21m, -0.37m " |
| coverage_L2 = |
"99" |
| long_name = |
"Soil temperature, sensor 2, soil moisture probe 1" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"C" |
| coverage_L3 = |
"99" |
| valid_range = |
"0,60" |
| rangecheck_upper = |
"[60]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ts_20cma_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Ts_20cmaQC flag" |
| units = |
"none" |
| double | Ts_20cmb [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Campbell Scientific TCAV" |
| ancillary_variables = |
"Ts_01c QC flag" |
| height = |
"-0.07m, -0.14m, -0.21m, -0.37m " |
| coverage_L2 = |
"99" |
| long_name = |
"Soil temperature, sensor 3, soil moisture probe 2" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"C" |
| coverage_L3 = |
"99" |
| valid_range = |
"0,60" |
| rangecheck_upper = |
"[60]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ts_20cmb_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Ts_20cmbQC flag" |
| double | Ts_8cma [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Campbell Scientific TCAV" |
| ancillary_variables = |
"Ts_8cma QC flag" |
| height = |
"-0.08m" |
| coverage_L2 = |
"99" |
| long_name = |
"Soil temperature, sensor 1a" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"C" |
| coverage_L3 = |
"99" |
| valid_range = |
"0,60" |
| rangecheck_upper = |
"[60]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ts_8cma_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Ts_8cmaQC flag" |
| double | Ts_8cmb [time=3553, latitude=1, longitude=1] |
| instrument = |
"Campbell Scientific TCAV" |
| ancillary_variables = |
"Ts_8cmb QC flag" |
| height = |
"-0.08m" |
| coverage_L2 = |
"99" |
| long_name = |
"Soil temperature, sensor 1b" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"C" |
| coverage_L3 = |
"99" |
| missing_value = |
-9999.0 |
| int | Ts_8cmb_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Ts_8cmbQC flag" |
| units = |
"none" |
| double | Tv_CSAT [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT" |
| ancillary_variables = |
"Tv_CSAT QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Virtual air temperature" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"C" |
| coverage_L3 = |
"91" |
| valid_range = |
"-3,50" |
| rangecheck_upper = |
"[50]*12" |
| rangecheck_lower = |
"[-3]*12" |
| int | Tv_CSAT_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Tv_CSATQC flag" |
| units = |
"none" |
| double | Ux [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT" |
| ancillary_variables = |
"Ux QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Wind speed, longitudinal component" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"m/s" |
| coverage_L3 = |
"91" |
| valid_range = |
"-20,20" |
| rangecheck_upper = |
"[20]*12" |
| rangecheck_lower = |
"[-20]*12" |
| int | Ux_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"UxQC flag" |
| units = |
"none" |
| double | UxA [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT3, Li-7500" |
| ancillary_variables = |
"UxA QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"90" |
| long_name = |
"Covariance of Ux and H2O" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"g/m2/s" |
| coverage_L3 = |
"90" |
| valid_range = |
"-1,1" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[-1]*12" |
| int | UxA_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"UxAQC flag" |
| double | UxC [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT3, Li-7500" |
| ancillary_variables = |
"UxC QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"85" |
| long_name = |
"Covariance of Ux and CO2" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"mg/m2/s" |
| coverage_L3 = |
"85" |
| valid_range = |
"-4,4" |
| rangecheck_upper = |
"[4]*12" |
| rangecheck_lower = |
"[-4]*12" |
| int | UxC_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"UxCQC flag" |
| units = |
"none" |
| double | UxT [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT3" |
| ancillary_variables = |
"UxT QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Covariance of Ux and T" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"mC/s\"" |
| coverage_L3 = |
"91" |
| valid_range = |
"-2,2" |
| rangecheck_upper = |
"[2]*12" |
| rangecheck_lower = |
"[-2]*12" |
| int | UxT_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"UxTQC flag" |
| double | UxUx [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT" |
| ancillary_variables = |
"UxUx QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Longitudinal wind speed (CSAT coordinates), variance" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"m2/s2" |
| coverage_L3 = |
"91" |
| valid_range = |
"-10,10" |
| rangecheck_upper = |
"[10]*12" |
| rangecheck_lower = |
"[-10]*12" |
| int | UxUx_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"UxUxQC flag" |
| units = |
"none" |
| double | UxUy [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT" |
| ancillary_variables = |
"UxUy QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"90" |
| long_name = |
"Covariance of Ux and Uy" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"m2/s2" |
| coverage_L3 = |
"90" |
| valid_range = |
"-1,1" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[-1]*12" |
| int | UxUy_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"UxUyQC flag" |
| double | UxUz [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT3" |
| ancillary_variables = |
"UxUz QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Covariance of Ux and Uz" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"m2/s2" |
| coverage_L3 = |
"91" |
| valid_range = |
"-10,10" |
| rangecheck_upper = |
"[10]*12" |
| rangecheck_lower = |
"[-10]*12" |
| int | UxUz_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"UxUzQC flag" |
| units = |
"none" |
| double | Ux_Sd [time=3553, latitude=1, longitude=1] |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"98" |
| long_name = |
"Longitudinal velocity component from CSAT, standard deviation" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"m/s" |
| coverage_L3 = |
"98" |
| missing_value = |
-9999.0 |
| int | Ux_Sd_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Ux_SdQC flag" |
| units = |
"none" |
| double | Uy [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT" |
| ancillary_variables = |
"Uy QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Wind speed, lateral component" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"m/s" |
| coverage_L3 = |
"91" |
| valid_range = |
"-20,20" |
| rangecheck_upper = |
"[20]*12" |
| rangecheck_lower = |
"[-20]*12" |
| int | Uy_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"UyQC flag" |
| units = |
"none" |
| double | UyA [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT3, Li-7500" |
| ancillary_variables = |
"UyA QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"90" |
| long_name = |
"Covariance of Uy and H2O" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"g/m2/s" |
| coverage_L3 = |
"90" |
| valid_range = |
"-1,1" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[-1]*12" |
| int | UyA_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"UyAQC flag" |
| units = |
"none" |
| double | UyC [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT3, Li-7500" |
| ancillary_variables = |
"UyC QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"85" |
| long_name = |
"Covariance of Uy and CO2" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"mg/m2/s" |
| coverage_L3 = |
"85" |
| valid_range = |
"-4,4" |
| rangecheck_upper = |
"[4]*12" |
| rangecheck_lower = |
"[-4]*12" |
| int | UyC_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"UyCQC flag" |
| double | UyT [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT3" |
| ancillary_variables = |
"UyT QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Covariance of Uy and T" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"mC/s" |
| coverage_L3 = |
"91" |
| valid_range = |
"-2,2" |
| rangecheck_upper = |
"[2]*12" |
| rangecheck_lower = |
"[-2]*12" |
| int | UyT_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"UyTQC flag" |
| double | UyUy [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT" |
| ancillary_variables = |
"UyUy QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Lateral wind speed component (CSAT coordinates), variance" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"m2/s2" |
| coverage_L3 = |
"91" |
| valid_range = |
"-10,10" |
| rangecheck_upper = |
"[10]*12" |
| rangecheck_lower = |
"[-10]*12" |
| int | UyUy_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"UyUyQC flag" |
| units = |
"none" |
| double | UyUz [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT3" |
| ancillary_variables = |
"UyUz QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Covariance of Uy and Uz" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"m2/s2\"/s2" |
| coverage_L3 = |
"91" |
| valid_range = |
"-10,10" |
| rangecheck_upper = |
"[10]*12" |
| rangecheck_lower = |
"[-10]*12" |
| int | UyUz_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"UyUzQC flag" |
| double | Uy_Sd [time=3553, latitude=1, longitude=1] |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"98" |
| long_name = |
"Lateral velocity component from CSAT, standard deviation" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"m/s" |
| coverage_L3 = |
"98" |
| missing_value = |
-9999.0 |
| int | Uy_Sd_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Uy_SdQC flag" |
| units = |
"none" |
| double | Uz [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT" |
| ancillary_variables = |
"Uz QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Wind speed, vertical component" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"m/s" |
| coverage_L3 = |
"91" |
| valid_range = |
"-1,1" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[-1]*12" |
| int | Uz_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"UzQC flag" |
| double | UzA [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT3, Li-7500" |
| ancillary_variables = |
"UzA QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"88" |
| long_name = |
"Covariance of Uz and H2O" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"g/m2/s" |
| coverage_L3 = |
"88" |
| valid_range = |
"-0.01,0.5" |
| rangecheck_upper = |
"[0.5]*12" |
| rangecheck_lower = |
"[-0.01]*12" |
| int | UzA_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"UzAQC flag" |
| units = |
"none" |
| double | UzC [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT3, Li-7500" |
| ancillary_variables = |
"UzC QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"89" |
| long_name = |
"Covariance of Uz and CO2" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"mg/m2/s" |
| coverage_L3 = |
"89" |
| valid_range = |
"-2,2" |
| rangecheck_upper = |
"[2]*12" |
| rangecheck_lower = |
"[-2]*12" |
| int | UzC_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"UzCQC flag" |
| units = |
"none" |
| double | UzT [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT3" |
| ancillary_variables = |
"UzT QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Covariance of Uz and T" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"mC/s" |
| coverage_L3 = |
"91" |
| valid_range = |
"-0.2,1" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[-0.2]*12" |
| int | UzT_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"UzTQC flag" |
| units = |
"none" |
| double | UzUz [time=3553, latitude=1, longitude=1] |
| instrument = |
"CSAT" |
| ancillary_variables = |
"UzUz QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Vertical wind speed (CSAT coordinates), variance" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"m2/s2" |
| coverage_L3 = |
"91" |
| missing_value = |
-9999.0 |
| int | UzUz_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"UzUzQC flag" |
| double | Uz_Sd [time=3553, latitude=1, longitude=1] |
| instrument = |
"not defined" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| coverage_L2 = |
"98" |
| long_name = |
"Vertical velocity component from CSAT, standard deviation" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"m/s" |
| coverage_L3 = |
"98" |
| missing_value = |
-9999.0 |
| int | Uz_Sd_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Uz_SdQC flag" |
| units = |
"none" |
| double | VPD [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Vapour pressure deficit" |
| standard_name = |
"water_vapor_saturation_deficit_in_air" |
| instrument = |
"not defined" |
| units = |
"kPa" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | VPD_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"VPDQC flag" |
| units = |
"none" |
| double | Vbat [time=3553, latitude=1, longitude=1] |
| instrument = |
"Campbell Scientific CR3000 logger" |
| ancillary_variables = |
"None" |
| coverage_L2 = |
"99" |
| long_name = |
"Battery voltage at logger" |
| standard_name = |
"not defined" |
| serial_number = |
"" |
| units = |
"V" |
| coverage_L3 = |
"99" |
| missing_value = |
-9999.0 |
| int | Vbat_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"VbatQC flag" |
| units = |
"none" |
| double | Wd [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"WindSonic4" |
| ancillary_variables = |
"Wd_WS4 QC flag" |
| valid_range = |
"0,360" |
| coverage_L2 = |
"99" |
| long_name = |
"Wind direction, merged from Wd_WS4, Wd_CSAT" |
| standard_name = |
"wind_from_direction" |
| serial_number = |
"" |
| units = |
"deg" |
| coverage_L3 = |
"99" |
| height = |
"heightm" |
| rangecheck_upper = |
"[360]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Wd_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"WdQC flag" |
| units = |
"none" |
| double | Wd_CSAT [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT" |
| ancillary_variables = |
"Wd_CSAT QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Wind direction" |
| standard_name = |
"wind_from_direction" |
| serial_number = |
"" |
| units = |
"deg" |
| coverage_L3 = |
"91" |
| valid_range = |
"0,360" |
| rangecheck_upper = |
"[360]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Wd_CSAT_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Wd_CSATQC flag" |
| units = |
"none" |
| double | Wd_WS4 [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"WindSonic4" |
| ancillary_variables = |
"Wd_WS4 QC flag" |
| height = |
"heightm" |
| coverage_L2 = |
"99" |
| long_name = |
"Wind direction" |
| standard_name = |
"wind_from_direction" |
| serial_number = |
"" |
| units = |
"deg" |
| coverage_L3 = |
"99" |
| valid_range = |
"0,360" |
| rangecheck_upper = |
"[360]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Wd_WS4_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Wd_WS4QC flag" |
| units = |
"none" |
| double | Ws [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"WindSonic4" |
| ancillary_variables = |
"Ws_WS4 QC flag" |
| valid_range = |
"0,30" |
| coverage_L2 = |
"99" |
| long_name = |
"Wind speed, merged from Ws_WS4, Ws_CSAT" |
| standard_name = |
"wind_speed" |
| serial_number = |
"" |
| units = |
"m/s" |
| coverage_L3 = |
"99" |
| height = |
"heightm" |
| rangecheck_upper = |
"[30]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ws_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"WsQC flag" |
| units = |
"none" |
| double | Ws_CSAT [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"CSAT" |
| ancillary_variables = |
"Ws_CSAT QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"91" |
| long_name = |
"Wind speed" |
| standard_name = |
"wind_speed" |
| serial_number = |
"" |
| units = |
"m/s" |
| coverage_L3 = |
"91" |
| valid_range = |
"0,20" |
| rangecheck_upper = |
"[20]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ws_CSAT_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Ws_CSATQC flag" |
| units = |
"none" |
| double | Ws_WS4 [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"WindSonic4" |
| ancillary_variables = |
"Ws_WS4 QC flag" |
| height = |
"heightm" |
| coverage_L2 = |
"99" |
| long_name = |
"Wind speed" |
| standard_name = |
"wind_speed" |
| serial_number = |
"" |
| units = |
"m/s" |
| coverage_L3 = |
"99" |
| valid_range = |
"0,20" |
| rangecheck_upper = |
"[20]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ws_WS4_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"Ws_WS4QC flag" |
| units = |
"none" |
| double | co2_wpl_Fe [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"86" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"WPL correction to Fc due to Fe" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"mg/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | co2_wpl_Fe_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"co2_wpl_FeQC flag" |
| double | co2_wpl_Fh [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"86" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"WPL correction to Fc due to Fh" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"mg/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | co2_wpl_Fh_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"co2_wpl_FhQC flag" |
| units = |
"none" |
| double | dTs [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Change in soil temperature" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"C" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | dTs_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"dTsQC flag" |
| units = |
"none" |
| int | e_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"eQC flag" |
| units = |
"none" |
| double | esat [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Saturation vapour pressure" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"kPa" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | esat_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"esatQC flag" |
| units = |
"none" |
| double | eta [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"91" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Horizontal rotation angle" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"deg" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | eta_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"etaQC flag" |
| double | ps [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| instrument = |
"Li-7500" |
| ancillary_variables = |
"ps QC flag" |
| height = |
"30m" |
| coverage_L2 = |
"99" |
| long_name = |
"Air pressure, average" |
| standard_name = |
"surface_air_pressure" |
| serial_number = |
"" |
| units = |
"kPa" |
| coverage_L3 = |
"99" |
| valid_range = |
"95,105" |
| rangecheck_upper = |
"[105]*12" |
| rangecheck_lower = |
"[95]*12" |
| int | ps_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"psQC flag" |
| double | q [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Specific humidity" |
| standard_name = |
"specific_humidity" |
| instrument = |
"not defined" |
| units = |
"kg/kg" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | q_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"qQC flag" |
| units = |
"none" |
| double | rhod [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Density of dry air" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"kg/m3" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | rhod_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"rhodQC flag" |
| units = |
"none" |
| double | rhom [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Density of moist air" |
| standard_name = |
"air_density" |
| instrument = |
"not defined" |
| units = |
"kg/m3" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | rhom_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"rhomQC flag" |
| units = |
"none" |
| double | rhow [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"not defined" |
| height = |
"not defined" |
| long_name = |
"Partial density of water vapour" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"kg/m3" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | rhow_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"rhowQC flag" |
| double | theta [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"91" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Vertical rotation angle" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"deg" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | theta_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"thetaQC flag" |
| units = |
"none" |
| double | u [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"91" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Longitudinal component of wind-speed in natural wind coordinates" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | u_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"uQC flag" |
| units = |
"none" |
| double | ustar [time=3553, latitude=1, longitude=1] |
| missing_value = |
-9999.0 |
| long_name = |
"Friction velocity, rotated to natural wind coordinates" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| instrument = |
"not defined" |
| standard_name = |
"not defined" |
| serial_number = |
"not defined" |
| units = |
"m/s" |
| coverage_L3 = |
"90" |
| valid_range = |
"0,2" |
| rangecheck_upper = |
"[2]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | ustar_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"ustarQC flag" |
| units = |
"none" |
| double | uu [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"90" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Variance of streamwise windspeed, rotated to natural wind coordinates" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | uu_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"uuQC flag" |
| units = |
"none" |
| double | uv [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"90" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Horizontal streamwise-crosswind covariance, rotated to natural wind coordinates" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | uv_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"uvQC flag" |
| double | uw [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"90" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Momentum flux X component, corrected to natural wind coordinates" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | uw_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"uwQC flag" |
| units = |
"none" |
| double | v [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"91" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Lateral component of wind-speed in natural wind coordinates" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | v_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"vQC flag" |
| units = |
"none" |
| double | vv [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"90" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Variance of crossstream windspeed, rotated to natural wind coordinates" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | vv_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"vvQC flag" |
| double | vw [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"90" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Momentum flux Y component, corrected to natural wind coordinates" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | vw_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"vwQC flag" |
| units = |
"none" |
| double | w [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"91" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Vertical component of wind-speed in natural wind coordinates" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | w_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"wQC flag" |
| units = |
"none" |
| double | wA [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"87" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Latent heat flux, rotated to natural wind coordinates" |
| standard_name = |
"surface_upward_latent_heat_flux" |
| instrument = |
"not defined" |
| units = |
"W/m2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | wA_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"wAQC flag" |
| units = |
"none" |
| double | wC [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"83" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Friction velocity, rotated to natural wind coordinates" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | wC_QCFlag [time=3553, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"wCQC flag" |
| double | wT [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"91" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Virtual heat flux, rotated to natural wind coordinates" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"W/m2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | wT_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"wTQC flag" |
| units = |
"none" |
| double | ww [time=3553, latitude=1, longitude=1] |
| coverage_L3 = |
"90" |
| ancillary_variables = |
"not defined" |
| height = |
"30m" |
| long_name = |
"Variance of vertical windspeed, rotated to natural wind coordinates" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | ww_QCFlag [time=3553, latitude=1, longitude=1] |
| long_name = |
"wwQC flag" |
| units = |
"none" |
| int | crs |
| inverse_flattening = |
"298.257223563" |
| grid_mapping_name = |
"latitude_longitude" |
| long_name = |
"WGS 1984 datum" |
| longitude_of_prime_meridian = |
"0.0" |
| semi_major_axis = |
"6378137.0" |