| Global Attributes |
| Name |
Value |
| reference04 |
Cleverly, J, D Eamus, Q Luo, N Restrepo Coupe, N Kljun, X Ma, C Ewenz, L Li, Q Yu, and A Huete (2016), The importance of interacting climate modes on Australia's contribution to global carbon cycle extremes, Scientific Reports, 6, 23113, doi: 10.1038/srep23113. |
| reference05 |
Cleverly, J, D Eamus, E Van Gorsel, C Chen, R Rumman, Q Luo, NR Coupe, L Li, N Kljun, R Faux, Q Yu, and A Huete (2016), Productivity and evapotranspiration of two contrasting semiarid ecosystems following the 2011 global carbon land sink anomaly, Agric. For. Meteor., 220, 151-159, doi: 10.1016/j.agrformet.2016.01.086. |
| reference06 |
Cleverly, J (2016), Postcards from the Field, EOS. Transactions of the American Geophysical Union, 97, C3. |
| comment19 |
11 May 2016: L6 semantics updated for explicit inclusion of abiotic carbon sources: NEE = CE - GPP = (ER + CE) - GPP; CE: ecosystem-scale CO2 efflux; ER: ecosystem respiration; GPP: gross primary production |
| reference07 |
Eamus, D, A Huete, J Cleverly, RH Nolan, X Ma, T Tarin, and NS Santini (2016), Mulga, a major tropical dry open forest of Australia: recent insights to carbon and water fluxes, Environ. Res. Lett., 11, 125011, doi: 10.1088/1748-9326/11/12/125011. |
| comment18 |
16 Dec 2015: L6 semantics updated to follow Chapin et al. 2006: NEE = ER - GPP; ER: ecosystem respiration (equivalent to ecosystem decomposition); GPP: gross primary production |
| reference01 |
Eamus, D., J. Cleverly, N. Boulain, N. Grant, R. Faux, and R. Villalobos-Vega (2013), Carbon and water fluxes in an arid-zone Acacia savanna woodland: An analyses of seasonal patterns and responses to rainfall events, Agric. For. Meteor., 182-183, 225-238, doi: 10.1016/j.agrformet.2013.04.020. |
| z_z_minus_d |
6.58 m |
| reference03 |
Rammig, A, and MD Mahecha (2015), Ecology: Ecosystem responses to climate extremes, Nature, 527, 315-316, doi: 10.1038/527315a. |
| z_pressure |
2 m |
| z_rain |
2.5 m |
| Flag070 |
GapFilling: Gap Filled by replacement from paired tower |
| z_roughness |
0.6 m |
| site_name |
TiTreeEast |
| z_EC |
9.81 m |
| soil |
red kandosol, sand |
| citation |
Cleverly, J. (2013), Ti Tree East OzFlux Site, OzFlux: Australian and New Zealand Flux Research and Monitoring Network, hdl: 102.100.100/11135. |
| site |
Ti Tree East, Northern Territory, Australia |
| comment14 |
17 July 2014: Carbon flux outputs converted at L3 and L4: Fc [mgCO2 m-2 s-1], Fc_co2 [mgCO2 m-2 s-1], Fc_c [mgC m-2 s-1], NEE [umol m-2 s-1], NEP = -NEE |
| comment10 |
30 Oct 2013: Carbon flux outputs converted at L3 and L4: Fc [mgC m-2 s-1], Fco2 [mgCO2 m-2 s-1], NEE [umol m-2 s-1], NEP = -NEE |
| comment12 |
1 Jan 2014: Units for Fc and Fco2 corrected |
| tower_height |
10 m |
| z_HMP_canopy |
4.85 m |
| L5Functions |
GapFillUsingSOLO, CalculateET, PenmanMonteith, CalculateAvailableEnergy, do_qccheck(RangeCheck, diurnalcheck, excludedates, excludehours), Sums |
| EPDversion |
2.7.3 |EPD 7.3-1 (32-bit)| (default, Apr 12 2012, 11:28:34)
[GCC 4.0.1 (Apple Inc. build 5493)] |
| z_HMP_displacement |
3.25 m |
| vegetation2 |
Corymbia/Triodia savanna |
| vegetation1 |
Mulga trees with grassy interspaces and understorey |
| title |
Flux tower data set from the Ti Tree East site for the calendar year 2017 |
| Flag100 |
Partitioning Day: GPP/ER computed from light-response curves, GPP = ER - Fc |
| source |
10m flux tower plus array of soil sensors |
| xlL5_moddatetime |
2020-07-28 10:39:02 |
| Flag180 |
Penman-Monteith 2-layer: rav_base short-circuit |
| longitude |
133.640 |
| z_HMP_met |
2.0 m |
| latitude |
-22.287 |
| Flag022 |
Corrections/Combinations: L=0 in zeta=z/L |
| Flag021 |
Corrections/Combinations: Data-flag mismatch |
| xl_moddatetime |
2020-07-27 12:08:25 |
| data_url |
http://data.ozflux.org.au |
| elevation |
600m |
| Level |
L5_FluxFilled |
| QC_version_history |
Version History:
<<1.0 6 June 2018, Update and new version name, Bilby TS Time Series Analyst>>
Version History, OzFluxQC Simulator:
<<2.9.5 20 December 2015, implementation of Chapin semantics for carbon fluxes (ammended)>>
<<2.9.0 15 May 2015, Reconciled against OzFluxQC v2.9.0; variances, standard deviations and rotations updated>>
<<2.8.6 2 Jan 2015, Reconciled against OzFluxQC v2.8.6>>
<<v2.8.5 2 Oct 2014, Update following Alice Springs workshop>>
<<v2.8.4a 18 Sep 2014, Reconciled against OzFluxQCv2.8.4, L1-L4 including new levels L4-L6>>
<<v2.8.1a 12 Sep 2014, Reconciled against OzFluxQCv2.8.1, L1-L3 including new 3-D ncFile specifications>>
<<v2.7 28 Oct 2013, Error in calculation of rhod corrected (rhod previously computed as total air density)>>
<<v2.6 26 Sep 2013, Units error in WPLcov corrected>>
<<v2.5 18 May 2013, Footprint model complete (rotated to geographic coordinates (m)-1d & 2d footprints, weighted footrpints, footprint climatology)>>
<<v2.4 19 Apr 2013, WPL error introduced in v2.3 corrected, weighted footprint output added>>
<<v2.3 24 Feb 2013, ET calculation added, controlfiles revised to simplify function calls>>
<<v2.2 11 Feb 2013, Climatology implemented at L3 and L4; Penman-Monteith updated to output Gc, correct Gst computation to use air-to-soil q gradient rather than saturation deficit>>
<<v2.1 3 Feb 2013, MOST footprint model (Kljun et al. 2004) implemented at L3>>
<<v2.0 8 Jun 2012, version arrising from conclusion of OzFlux UTS data workshop>>
<<v1.4 30 Sep 2011, final version arrising from OzFlux Black Mountain data workshop>>
<<v1.0: 21 Jul 2011, code diversion reconciliation>>
|
| QC_version |
Bilby_TS v1.0 |
| Flag140 |
Partitioning Day: ER_dark from source period (+NEE) light response curves |
| Flag130 |
Partitioning Day: ER_dark from sink period (+NEP) light response curves |
| z_soil_heat |
-0.08 m |
| Flag030 |
GapFilling: Gap Filled by ANN (SOLO) |
| Flag031 |
GapFilling: Gap not filled |
| conventions_names |
CF convention standard names table version 27, 28 Nov 2013, audited 4 Jan 2015 |
| L3Functions |
BypassSwsTcorr, do_linear, MergeSeriesAhTaCc, TaFromTv, CalculateMetVars, CoordRotation2D, Massman, CalculateFluxes, FhvtoFh, WPLcov, MergeSeriesWS, SoilAverage, CorrectFgForStorage, CalculateAvailableEnergy, qTprofile, PenmanMonteith, do_qccheck(RangeCheck, diurnalcheck, excludedates, excludehours), CoordinateFluxGaps, CoordinateAh7500AndFcGaps, CalculateET, convertFc |
| Functions |
do_qcchecks, BypassSwsTcorr, do_linear, MergeSeriesAhTaCc, TaFromTv, CalculateMetVars, CoordRotation2D, Massman, CalculateFluxes, FhvtoFh, WPLcov, MergeSeriesWS, SoilAverage, CorrectFgForStorage, CalculateAvailableEnergy, qTprofile, PenmanMonteith, do_qccheck(RangeCheck, diurnalcheck, excludedates, excludehours), CoordinateFluxGaps, CoordinateAh7500AndFcGaps, CalculateET, convertFc, convertFc, CalculateMetVars, MergeSeriesWS, InterpolateOverMissing, do_qccheck(RangeCheck, diurnalcheck, excludedates, excludehours), GapFillUsingSOLO, CalculateET, PenmanMonteith, CalculateAvailableEnergy, do_qccheck(RangeCheck, diurnalcheck, excludedates, excludehours), Sums |
| coverage_flux_L3 |
70 |
| coverage_flux_L5 |
100 |
| conventions |
CF-1.6 |
| reference00_list |
01: Eamus et al. 2013 (gapfilling procedures); 02: Cleverly et al. 2013 (Penman-Monteith and drag coefficient); 03: Rammig and Mahecha 2015; 04,05: Cleverly et al. 2016; 06: Cleverly 2016; 07: Eamus et al. 2016; 08: Beringer et al. 2016; 09: Isaac et al. 2017; 10,11: Maruyama and Segawa 2017 |
| Flag120 |
Partitioning Day: Fc > CE, GPP = 0, CE = Fc |
| Flag085 |
GapFilling: L5 Diurnal SD Check |
| Flag084 |
GapFilling: L5 Range Check |
| Flag087 |
GapFilling: L6 Diurnal SD Check |
| Flag086 |
GapFilling: L6 Range Check |
| Flag081 |
GapFilling: u* not from Fh |
| Flag080 |
GapFilling: u* from Fh |
| Flag083 |
GapFilling: L4 Diurnal SD Check |
| Flag082 |
GapFilling: L4 Range Check |
| Flag005 |
QA/QC: LI7500 Diagnostic |
| Flag004 |
QA/QC: CSAT Diagnostic |
| Flag007 |
QA/QC: Excluded Hours |
| nc_nrecs |
17520 |
| Flag001 |
QA/QC: -9999 in level 1 dataset |
| Flag000 |
Good data |
| Flag003 |
QA/QC: L2 Diurnal SD Check |
| Flag002 |
QA/QC: L2 Range Check |
| Flag009 |
albedo: bad time flag (not midday 10.00 to 14.00) |
| Flag008 |
albedo: bad Fsd < threshold (290 W/m2 default) only if bad time flag not set |
| version |
OzFluxQC Simulator v.2.9.5, https://github.com/james-cleverly/OzFluxQC_Simulator |
| z_wind |
8.28 m |
| z_soil_water |
-0.05, -0.2, -0.6, -0.7, -1.15 m (centre of sensing footprint, which is typically plus or minus 10 cm, except at 1.0 m, where it is plus or minus 15 cm; data labels represent top of sensing footprint) |
| z_ |
m |
| z_radiation |
9.9 m |
| z_displacement |
3.23 m |
| canopy_height |
4.85m |
| license_type |
CC-BY-4.0 |
| Flag151 |
Partitioning Day: no solution from conditional correlation |
| Flag150 |
Partitioning Day: PD, CE_day & GPP from conditional correlation |
| coverage_radiation_L4 |
99 |
| coverage_radiation_L5 |
99 |
| Flag090 |
Partitioning Night: ER computed from exponential temperature response curves |
| xl_filename |
../TiTreeEast/level2_intermediates/TTE_EC_2019_L2_prefilled.xls |
| Flag012 |
Corrections/Combinations: Massman Frequency Attenuation Correction (Coord Rotation, Tv_CSAT, Ah_HMP, ps) |
| Flag013 |
Corrections/Combinations: Virtual to Actual Fh (Coord Rotation, Massman, Ta_HMP) |
| Flag010 |
Corrections: Apply Linear |
| Flag011 |
Corrections/Combinations: Coordinate Rotation (Ux, Uy, Uz, UxT, UyT, UzT, UxA, UyA, UzA, UxC, UyC, UzC, UxUz, UxUx, UxUy, UyUz, UxUy, UyUy) |
| Flag016 |
Corrections/Combinations: L3 Range Check |
| Flag017 |
Corrections/Combinations: L3 Diurnal SD Check |
| Flag014 |
Corrections/Combinations: WPL correction for flux effects on density measurements (Coord Rotation, Massman, Fhv to Fh, Cc_7500_Av) |
| Flag015 |
Corrections/Combinations: Ta from Tv |
| Flag018 |
Corrections/Combinations: u* filter |
| Flag019 |
Corrections/Combinations: Gap coordination |
| time_zone |
Australia/Darwin |
| FLUXNET |
AU-TTE |
| ozflux_url |
http://ozflux.org.au/ |
| comment |
CF convention version, updated and audited 28-30 Oct 2013 |
| L4Functions |
convertFc, CalculateMetVars, MergeSeriesWS, InterpolateOverMissing, do_qccheck(RangeCheck, diurnalcheck, excludedates, excludehours) |
| reference11 |
Maruyama, T, and M Segawa (2017), Estimation Accuracy for Reciprocal Analysis of Sensible and Latent Heat Flux Focusing on Radiometric Temperature and Lag-Time, Open Journal of Modern Hydrology, 7, 105�124, doi: 10.4236/ojmh.2017.72006. |
| reference10 |
Maruyama, T, and M Segawa (2017), Estimation of the Sensible and Latent Heat Fluxes by Reciprocal Analysis at an Arid and Semi-Arid Region, Open Journal of Modern Hydrology, 7, 38�64, doi: 10.4236/ojmh.2017.71003. |
| coverage_meteorology_L3 |
99 |
| coverage_meteorology_L5 |
99 |
| coverage_meteorology_L4 |
99 |
| Flag060 |
GapFilling: Gap Filled by interpolation |
| coverage_soil_L5 |
100 |
| coverage_radiation_L3 |
99 |
| coverage_soil_L3 |
100 |
| start_date |
2019-01-01 00:00:00 |
| z_HMP |
9.81 m |
| end_date |
2019-12-31 23:30:00 |
| metadata_url |
http://www.ozflux.org.au/monitoringsites/titreeeast/index.html |
| nc_rundatetime |
2020-07-28 10:57:26 |
| version_citation |
Cleverly, J, and P Isaac (2016), OzFluxQC Simulator version 2.9.5, GitHub respository, github.com/james-cleverly/OzFluxQC_Simulator, doi: 10.5281/zenodo.50109. |
| Flag174 |
Penman-Monteith: Uavg == 0 (undefined aerodynamic resistance under calm conditions) only if bad Fe and bad Fsd flags not set |
| coverage_flux_L4 |
70 |
| Flag171 |
Penman-Monteith: bad rav or rSm only if bad Uavg, bad Fe and bad Fsd flags not set |
| institution |
University of Technology Sydney |
| Flag173 |
Penman-Monteith: bad Fsd < threshold (10 W/m2 default) |
| Flag172 |
Penman-Monteith: bad Fe < threshold (0 W/m2 default) only if bad Fsd flag not set |
| coverage_soil_L4 |
100 |
| reference08 |
Beringer, J, LB Hutley, I McHugh, SK Arndt, D Campbell, HA Cleugh, J Cleverly, V Resco de Dios, D Eamus, B Evans, C Ewenz, P Grace, A Griebel, V Haverd, N Hinko-Najera, A Huete, P Isaac, K Kanniah, R Leuning, MJ Liddell, C Macfarlane, W Meyer, C Moore, E Pendall, A Phillips, RL Phillips, SM Prober, N Restrepo-Coupe, S Rutledge, I Schroder, R Silberstein, P Southall, MS Yee, NJ Tapper, E van Gorsel, C Vote, J Walker, and T Wardlaw (2016), An introduction to the Australian and New Zealand flux tower network � OzFlux, Biogeosciences, 13, 5895-5916, doi: 10.5194/bg-13-5895-2016. |
| reference09 |
Isaac, P, J Cleverly, I McHugh, E van Gorsel, C Ewenz, and J Beringer (2017), OzFlux data: network integration from collection to curation, Biogeosciences, 14, 2903-2928, doi: 10.5194/bg-14-2903-2017. |
| Flag162 |
Footprint: no solution |
| z_canopy |
4.85 m |
| site_pi |
James Cleverly, Derek Eamus |
| Flag161 |
Footprint: Date filter |
| reference02 |
Cleverly, J., C. Chen, N. Boulain, R. Villalobos-Vega, R. Faux, N. Grant, Q. Yu, and D. Eamus (2013), Aerodynamic Resistance and Penman-Monteith Evapotranspiration over a Seasonally Two-Layered Canopy in Semiarid Central Australia, J. Hydrometeor., 14, 1562-1570, doi: 10.1175/jhm-d-13-080.1. |
| Flag040 |
GapFilling: Gap Filled from one-minute average |
| Flag201 |
Penman-Monteith 2-layer: not parallel circuit (rav_full short-circuit) |
| Flag200 |
Penman-Monteith 2-layer: parallel circuit |
| z_soil_temperature |
-0.06, -0.02 m (averaging above z_soil_heat) |
| vegetation |
Open Corymbia-hummock savanna and Mulga patches |
| featureType |
timeseries |
| xlL5_datemode |
1 |
| Flag006 |
QA/QC: Excluded Dates |
| nc_level |
L5 |
| xl_datemode |
1 |
| controlfile_name |
/Volumes/Vedfolnir/EC/TiTreeEast/ControlFiles/2019/L5b-solo.txt |
| xlL5_filename |
../TiTreeEast/level3_intermediates/TTE_EC_2019_FullPreFilled.xls |
| Flag110 |
Partitioning Day: GPP night mask |
| contact |
james.cleverly@uts.edu.au |
| license_url |
https://creativecommons.org/licenses/by/4.0/legalcode |
| Flag211 |
Bulk Richardson number flags: delta_U=0 (RiB infinite) |
| Flag191 |
Penman-Monteith 2-layer: rav_top not short-circuit (rav_base undefined) |
| Flag190 |
Penman-Monteith 2-layer: rav_top short-circuit |
| time_step |
30 |
| Flag050 |
GapFilling: Gap Filled from alternate |
| Variables |
| double | CcCc [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Variance of CO2 concentration" |
| ancillary_variables = |
"CcCc QC flag" |
| coverage_L3 = |
"73" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"mg2/m6" |
| double | w_Sd [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Vertical velocity component from CSAT, standard deviation, rotated to natural wind coordinates" |
| instrument = |
"not defined" |
| ancillary_variables = |
"w_Sd QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| double | time [time=17520] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"time" |
| standard_name = |
"time" |
| units = |
"days since 1800-01-01 00:00:00.0" |
| calendar = |
"gregorian" |
| double | latitude [latitude=1] |
| long_name = |
"latitude" |
| standard_name = |
"latitude" |
| units = |
"degrees north" |
| _Netcdf4Dimid = |
1 |
| double | longitude [longitude=1] |
| long_name = |
"longitude" |
| standard_name = |
"longitude" |
| units = |
"degrees east" |
| _Netcdf4Dimid = |
2 |
| int | Day [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Day" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Day QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"none" |
| serial_number = |
"not defined" |
| missing_value = |
-9999 |
| int | Day_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"DayQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | Hdh [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Decimal hour of the day" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Hdh QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"none" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Hdh_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"HdhQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| int | Hour [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Hour" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Hour QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"none" |
| serial_number = |
"not defined" |
| missing_value = |
-9999 |
| int | Hour_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"HourQC flag" |
| int | Minute [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Minute" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Minute QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"none" |
| serial_number = |
"not defined" |
| missing_value = |
-9999 |
| int | Minute_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"MinuteQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| int | Month [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Month" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Month QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"none" |
| serial_number = |
"not defined" |
| missing_value = |
-9999 |
| int | Month_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"MonthQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| int | Second [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Second" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Second QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"none" |
| serial_number = |
"not defined" |
| missing_value = |
-9999 |
| int | Second_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"SecondQC flag" |
| units = |
"none" |
| int | Year [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Year" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Year QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"none" |
| serial_number = |
"not defined" |
| missing_value = |
-9999 |
| int | Year_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"YearQC flag" |
| units = |
"none" |
| double | xlDateTime [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Date/time in Excel format" |
| ancillary_variables = |
"" |
| cf_role = |
"timeseries_id" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"" |
| int | xlDateTime_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"xlDateTimeQC flag" |
| units = |
"none" |
| double | AGC_7500 [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"7500 AGC" |
| ancillary_variables = |
"AGC_7500 QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"none" |
| int | AGC_7500_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"AGC_7500QC flag" |
| units = |
"none" |
| double | Ah [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Absolute humidity (HMP)" |
| ancillary_variables = |
"Ah QC flag" |
| valid_range = |
"0,25" |
| coverage_L3 = |
"100" |
| standard_name = |
"mass_concentration_of_water_vapor_in_air" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"g/m3" |
| rangecheck_upper = |
"[25]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ah_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"AhQC flag" |
| units = |
"none" |
| double | AhAh [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Variance of Absolute humidity (7500)" |
| ancillary_variables = |
"AhAh QC flag" |
| coverage_L3 = |
"73" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"g2/m6" |
| int | AhAh_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"AhAhQC flag" |
| _Netcdf4Dimid = |
0 |
| double | Ah_7500_Av [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Absolute humidity (7500)" |
| ancillary_variables = |
"Ah_7500_Av QC flag" |
| valid_range = |
"0,30" |
| coverage_L3 = |
"70" |
| standard_name = |
"mass_concentration_of_water_vapor_in_air" |
| coverage_L4 = |
"70" |
| coverage_L5 = |
"70" |
| units = |
"g/m3" |
| rangecheck_upper = |
"[30]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Ah_7500_Av_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Ah_7500_AvQC flag" |
| units = |
"none" |
| double | Ah_Sd [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Absolute humidity from Li-7500, standard deviation" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Ah_Sd QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"g/m3" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Ah_Sd_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Ah_SdQC flag" |
| _Netcdf4Dimid = |
0 |
| double | CA [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Covariance of CO2 concentration and absolute humidity" |
| instrument = |
"not defined" |
| ancillary_variables = |
"CA QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"73" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"(mg g)/m6" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | CA_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"CAQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | C_Sd [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"CO2 concentration from Li-7500, standard deviation" |
| instrument = |
"not defined" |
| ancillary_variables = |
"C_Sd QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"mg/m3" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | C_Sd_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"C_SdQC flag" |
| units = |
"none" |
| double | C_ppm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"CO2 molar concentration (ppm)" |
| ancillary_variables = |
"Cc_ppm QC flag" |
| valid_range = |
"150,600" |
| coverage_L3 = |
"99" |
| standard_name = |
"mole_concentration_of_carbon_dioxide_in_air" |
| coverage_L4 = |
"99" |
| coverage_L5 = |
"99" |
| units = |
"umol/mol" |
| rangecheck_upper = |
"[600]*12" |
| rangecheck_lower = |
"[150]*12" |
| int | C_ppm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"C_ppmQC flag" |
| units = |
"none" |
| double | Cc [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"CO2 concentration, Merged from Cc_7500_Av" |
| ancillary_variables = |
"Cc QC flag" |
| valid_range = |
"350,1500" |
| coverage_L3 = |
"73" |
| standard_name = |
"mass_concentration_of_carbon_dioxide_in_air" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"mg/m3" |
| rangecheck_upper = |
"[1500]*12" |
| rangecheck_lower = |
"[350]*12" |
| int | Cc_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"CcQC flag" |
| int | CcCc_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"CcCcQC flag" |
| units = |
"none" |
| double | Cc_7500_Av [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"CO2 concentration" |
| ancillary_variables = |
"Cc_7500_Av QC flag" |
| valid_range = |
"350,1500" |
| coverage_L3 = |
"73" |
| standard_name = |
"mass_concentration_of_carbon_dioxide_in_air" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"mg/m3" |
| rangecheck_upper = |
"[1500]*12" |
| rangecheck_lower = |
"[350]*12" |
| int | Cc_7500_Av_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Cc_7500_AvQC flag" |
| _Netcdf4Dimid = |
0 |
| double | Diag_7500 [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"IRGA diagnostic value" |
| ancillary_variables = |
"Diag_7500 QC flag" |
| coverage_L3 = |
"99" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"99" |
| coverage_L5 = |
"99" |
| units = |
"none" |
| int | Diag_7500_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Diag_7500QC flag" |
| units = |
"none" |
| double | Diag_CSAT [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"CSAT diagnostic value" |
| ancillary_variables = |
"Diag_CSAT QC flag" |
| coverage_L3 = |
"99" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"99" |
| coverage_L5 = |
"99" |
| units = |
"none" |
| int | Diag_CSAT_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Diag_CSATQC flag" |
| double | ET [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| instrument = |
"not defined" |
| Level = |
"L5" |
| ancillary_variables = |
"ET QC flag" |
| height = |
"not defined" |
| long_name = |
"Evapotranspiration Flux" |
| standard_name = |
"lwe_water_evaporation_rate" |
| coverage_L3 = |
"70" |
| coverage_L4 = |
"70" |
| coverage_L5 = |
"100" |
| units = |
"mm/30min" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | ET_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"ETQC flag" |
| _Netcdf4Dimid = |
0 |
| double | Fa [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| instrument = |
"not defined" |
| valid_range = |
"-100,1000" |
| ancillary_variables = |
"Fa QC flag" |
| height = |
"not defined" |
| long_name = |
"Available energy using Fn,Fg, Available energy using Fn,Fg" |
| standard_name = |
"not defined" |
| coverage_L3 = |
"100" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"W/m2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| rangecheck_upper = |
"[1000]*12" |
| rangecheck_lower = |
"[-100]*12" |
| int | Fa_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"FaQC flag" |
| units = |
"none" |
| double | Fc [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| coverage_L3 = |
"70" |
| ancillary_variables = |
"Fc QC flag" |
| valid_range = |
"-0.8,2" |
| long_name = |
"Fc (Flux of carbon dioxide), Flux of carbon, Raw uncorrected, rotated to natural wind coordinates, frequency response corrected, WPL, SOLO ANN gapfilled" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"70" |
| coverage_L5 = |
"100" |
| units = |
"mgCO2/m2/s" |
| diurnalcheck_numsd = |
"[10]*12" |
| rangecheck_upper = |
"[2]*12" |
| rangecheck_lower = |
"[-0.8]*12" |
| int | Fc_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"FcQC flag" |
| units = |
"none" |
| double | Fc_c [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| coverage_L3 = |
"70" |
| ancillary_variables = |
"Fc_c QC flag" |
| height = |
"not defined" |
| long_name = |
"Fc_c (Flux of carbon), Flux of carbon, Raw uncorrected, rotated to natural wind coordinates, frequency response corrected, WPL, SOLO ANN gapfilled" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| coverage_L4 = |
"70" |
| coverage_L5 = |
"100" |
| units = |
"mgC/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Fc_c_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Fc_cQC flag" |
| double | Fc_co2 [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Fc_co2 (Flux of carbon dioxide), Flux of carbon, Raw uncorrected, rotated to natural wind coordinates, frequency response corrected, WPL, SOLO ANN gapfilled" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Fc_co2 QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"70" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"70" |
| coverage_L5 = |
"100" |
| units = |
"mgCO2/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Fc_co2_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Fc_co2QC flag" |
| double | Fe [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| coverage_L3 = |
"70" |
| ancillary_variables = |
"Fe QC flag" |
| valid_range = |
"-25,1000" |
| long_name = |
"Latent heat flux, Raw uncorrected, rotated to natural wind coordinates, frequency response corrected, WPL, SOLO ANN gapfilled" |
| standard_name = |
"surface_upward_latent_heat_flux" |
| coverage_L4 = |
"70" |
| coverage_L5 = |
"100" |
| units = |
"W/m2" |
| diurnalcheck_numsd = |
"[10]*12" |
| rangecheck_upper = |
"[1000]*12" |
| rangecheck_lower = |
"[-25]*12" |
| int | Fe_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"FeQC flag" |
| double | Fg [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| missing_value = |
-9999.0 |
| long_name = |
"Element-wise average surface ground heat flux measurements beneath spinifex and grass, corrected for heat storage above the sensor" |
| ancillary_variables = |
"Fg QC flag" |
| serial_number = |
"not defined" |
| height = |
"not defined" |
| instrument = |
"not defined" |
| standard_name = |
"downward_heat_flux_in_soil" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"W/m2" |
| coverage_L3 = |
"100" |
| valid_range = |
"-750,350" |
| rangecheck_upper = |
"[350]*12" |
| rangecheck_lower = |
"[-750]*12" |
| int | Fg_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"FgQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | Fg_grass [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil heat flux under grass, 8 cm depth" |
| ancillary_variables = |
"Fg_grass QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"downward_heat_flux_in_soil" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"W/m2" |
| int | Fg_grass_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"Fg_grassQC flag" |
| _Netcdf4Dimid = |
0 |
| units = |
"none" |
| double | Fg_mulga [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil heat flux under mulga, 8 cm depth" |
| ancillary_variables = |
"Fg_mulga QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"downward_heat_flux_in_soil" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"W/m2" |
| int | Fg_mulga_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Fg_mulgaQC flag" |
| units = |
"none" |
| double | Fg_spinifex [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil heat flux under spinifex, 8 cm depth" |
| ancillary_variables = |
"Fg_spinifex QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"downward_heat_flux_in_soil" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"W/m2" |
| int | Fg_spinifex_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"Fg_spinifexQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | Fh [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| coverage_L3 = |
"70" |
| ancillary_variables = |
"Fh QC flag" |
| valid_range = |
"-200,1000" |
| long_name = |
"Sensible heat flux, Raw uncorrected, rotated to natural wind coordinates, frequency response corrected, converted from virtual heat flux, SOLO ANN gapfilled" |
| standard_name = |
"surface_upward_sensible_heat_flux" |
| coverage_L4 = |
"70" |
| coverage_L5 = |
"100" |
| units = |
"W/m2" |
| diurnalcheck_numsd = |
"[10]*12" |
| rangecheck_upper = |
"[1000]*12" |
| rangecheck_lower = |
"[-200]*12" |
| int | Fh_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"FhQC flag" |
| _Netcdf4Dimid = |
0 |
| units = |
"none" |
| double | Fld [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| instrument = |
"Kipp and Zonen CNR1" |
| ancillary_variables = |
"Fld QC flag" |
| long_name = |
"Down-welling long wave" |
| standard_name = |
"surface_downwelling_longwave_flux_in_air" |
| coverage_L4 = |
"99" |
| coverage_L5 = |
"99" |
| units = |
"W/m2" |
| coverage_L3 = |
"98" |
| int | Fld_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"FldQC flag" |
| _Netcdf4Dimid = |
0 |
| units = |
"none" |
| double | Flu [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| instrument = |
"Kipp and Zonen CNR1" |
| ancillary_variables = |
"Flu QC flag" |
| long_name = |
"Up-welling long wave" |
| standard_name = |
"surface_upwelling_longwave_flux_in_air" |
| coverage_L4 = |
"99" |
| coverage_L5 = |
"99" |
| units = |
"W/m2" |
| coverage_L3 = |
"98" |
| int | Flu_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"FluQC flag" |
| double | Fm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| coverage_L3 = |
"71" |
| ancillary_variables = |
"Fm QC flag" |
| valid_range = |
"1e-15,5" |
| long_name = |
"Momentum flux, raw uncorrected, rotated to natural wind coordinates, frequency response corrected, Fm from gapfilled ustar" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"99" |
| units = |
"kg/m/s2" |
| diurnalcheck_numsd = |
"[10]*12" |
| rangecheck_upper = |
"[5]*12" |
| rangecheck_lower = |
"[1e-15]*12" |
| int | Fm_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"FmQC flag" |
| double | Fn [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Net radiation" |
| instrument = |
"Kipp and Zonen CNR1" |
| ancillary_variables = |
"Fn QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"surface_net_downwawrd_radiative_flux" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"W/m2" |
| int | Fn_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"FnQC flag" |
| units = |
"none" |
| double | Fsd [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| instrument = |
"Kipp and Zonen CNR1" |
| ancillary_variables = |
"Fsd QC flag" |
| long_name = |
"Down-welling short wave" |
| standard_name = |
"surface_downwelling_shortwave_flux_in_air" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"W/m2" |
| coverage_L3 = |
"100" |
| int | Fsd_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"FsdQC flag" |
| units = |
"none" |
| double | Fsd_syn [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Synthetic downwelling shortwave radiation" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Fsd_syn QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"surface_downwelling_shortwave_flux_in_air" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"W/m2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Fsd_syn_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Fsd_synQC flag" |
| units = |
"none" |
| double | Fsu [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| instrument = |
"Kipp and Zonen CNR1" |
| ancillary_variables = |
"Fsu QC flag" |
| long_name = |
"Up-welling short wave" |
| standard_name = |
"surface_upwelling_shortwave_flux_in_air" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"W/m2" |
| coverage_L3 = |
"100" |
| int | Fsu_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"FsuQC flag" |
| units = |
"none" |
| double | GSm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| InputSeries = |
"FeTaAhpsWsFnFsdFgVPDwA" |
| instrument = |
"not defined" |
| FeCutoff = |
0.0 |
| ancillary_variables = |
"GSm QC flag" |
| height = |
"not defined" |
| long_name = |
"Canopy conductance from Penman-Monteith inversion, Allen/Jensen formulation, L3, L5" |
| standard_name = |
"not defined" |
| coverage_L3 = |
"24" |
| coverage_L4 = |
"24" |
| coverage_L5 = |
"39" |
| units = |
"mmolH2O/(m2ground s)" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| FsdCutoff = |
10.0 |
| int | GSm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"GSmQC flag" |
| units = |
"none" |
| double | H_ppt [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"H2O molar concentration (ppt)" |
| ancillary_variables = |
"H_ppt QC flag" |
| valid_range = |
"0,25" |
| coverage_L3 = |
"99" |
| standard_name = |
"mole_concentration_of_water_vapor_in_air" |
| coverage_L4 = |
"99" |
| coverage_L5 = |
"99" |
| units = |
"mmol/mol" |
| rangecheck_upper = |
"[25]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | H_ppt_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"H_pptQC flag" |
| _Netcdf4Dimid = |
0 |
| int | L_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"LQC flag" |
| units = |
"none" |
| double | NEE [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"NEE (Net ecosystem exchange of carbon), Flux of carbon, Raw uncorrected, rotated to natural wind coordinates, frequency response corrected, WPL, SOLO ANN gapfilled" |
| instrument = |
"not defined" |
| ancillary_variables = |
"NEE QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"70" |
| standard_name = |
"surface_upward_mole_flux_of_carbon_dioxide" |
| coverage_L4 = |
"70" |
| coverage_L5 = |
"100" |
| units = |
"umol/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | NEE_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"NEEQC flag" |
| _Netcdf4Dimid = |
0 |
| double | NEP [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"NEP (Net ecosystem photosynthesis), Flux of carbon, Raw uncorrected, rotated to natural wind coordinates, frequency response corrected, WPL, SOLO ANN gapfilled" |
| instrument = |
"not defined" |
| ancillary_variables = |
"NEP QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"70" |
| standard_name = |
"surface_downward_mole_flux_of_carbon_dioxide" |
| coverage_L4 = |
"70" |
| coverage_L5 = |
"100" |
| units = |
"umol/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | NEP_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"NEPQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | Precip [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Rainfall, 30 minute total" |
| ancillary_variables = |
"Precip QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"rainfall_amount" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"mm" |
| int | Precip_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"PrecipQC flag" |
| units = |
"none" |
| double | RH [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Relative humidity (HMP) at 9.81 m height" |
| ancillary_variables = |
"RH QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"relative_humidity" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"fraction" |
| int | RH_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"RHQC flag" |
| units = |
"none" |
| double | SHD [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| instrument = |
"not defined" |
| ancillary_variables = |
"SHD QC flag" |
| height = |
"not defined" |
| long_name = |
"Specific humidity deficit" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"kg/kg" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | SHD_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"SHDQC flag" |
| units = |
"none" |
| double | Sws [time=17520, latitude=1, longitude=1] |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"frac" |
| diurnalcheck_numsd = |
"[10]*12" |
| missing_value = |
-9999.0 |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Element-wise average of series Sws_spinifex_0cm, Sws_mulga_0cm" |
| ancillary_variables = |
"Sws QC flag" |
| serial_number = |
"not defined" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_moisture_content" |
| instrument = |
"not defined" |
| int | Sws_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"SwsQC flag" |
| units = |
"none" |
| double | Sws_grass_0cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath inter-mulga grass, 0-10 cm depth" |
| ancillary_variables = |
"Sws_mulga_0cm QC flag" |
| valid_range = |
"0,1" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m3/m3" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_grass_0cm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Sws_grass_0cmQC flag" |
| units = |
"none" |
| double | Sws_grass_100cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath inter-mulga grass, 95-105 cm depth" |
| ancillary_variables = |
"Sws_grass_100cm QC flag" |
| valid_range = |
"0,1" |
| coverage_L3 = |
"0" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"0" |
| coverage_L5 = |
"0" |
| units = |
"m3/m3" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_grass_100cm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Sws_grass_100cmQC flag" |
| units = |
"none" |
| double | Sws_grass_100cm_b [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath inter-mulga grass, 95-105 cm depth" |
| ancillary_variables = |
"Sws_grass_100cm_b QC flag" |
| valid_range = |
"0,1" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m3/m3" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_grass_100cm_b_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"Sws_grass_100cm_bQC flag" |
| _Netcdf4Dimid = |
0 |
| units = |
"none" |
| double | Sws_grass_10cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath inter-mulga grass, 10-20 cm depth" |
| ancillary_variables = |
"Sws_grass_10cm QC flag" |
| valid_range = |
"0,1" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m3/m3" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_grass_10cm_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Sws_grass_10cmQC flag" |
| _Netcdf4Dimid = |
0 |
| double | Sws_grass_50cm_b [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath inter-mulga grass, 55-65 cm depth" |
| ancillary_variables = |
"Sws_grass_50cm_b QC flag" |
| valid_range = |
"0,1" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m3/m3" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_grass_50cm_b_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"Sws_grass_50cm_bQC flag" |
| _Netcdf4Dimid = |
0 |
| units = |
"none" |
| double | Sws_grass_60cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath inter-mulga grass, 55-65 cm depth" |
| ancillary_variables = |
"Sws_mulga_60cm QC flag" |
| valid_range = |
"0,1" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m3/m3" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_grass_60cm_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Sws_grass_60cmQC flag" |
| double | Sws_mulga_0cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath mulga, 0-10 cm depth" |
| ancillary_variables = |
"Sws_mulga_0cm QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m3/m3" |
| int | Sws_mulga_0cm_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"Sws_mulga_0cmQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | Sws_mulga_100cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"Sws_mulga_100cm QC flag" |
| valid_range = |
"0,1" |
| long_name = |
"Soil water content beneath mulga, 95-105 cm depth" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m3/m3" |
| diurnalcheck_numsd = |
"[10]*12" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_mulga_100cm_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"Sws_mulga_100cmQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | Sws_mulga_10cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| coverage_L3 = |
"99" |
| ancillary_variables = |
"Sws_mulga_10cm QC flag" |
| valid_range = |
"0,1" |
| long_name = |
"Soil water content beneath mulga, 10-20 cm depth" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m3/m3" |
| diurnalcheck_numsd = |
"[10]*12" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_mulga_10cm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Sws_mulga_10cmQC flag" |
| units = |
"none" |
| double | Sws_mulga_60cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath mulga, 55-65 cm depth" |
| ancillary_variables = |
"Sws_mulga_60cm QC flag" |
| valid_range = |
"0,1" |
| coverage_L3 = |
"0" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"0" |
| coverage_L5 = |
"0" |
| units = |
"m3/m3" |
| diurnalcheck_numsd = |
"[10]*12" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_mulga_60cm_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"Sws_mulga_60cmQC flag" |
| _Netcdf4Dimid = |
0 |
| units = |
"none" |
| double | Sws_spinifex_0cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath spinifex grass, 0-10 cm depth" |
| ancillary_variables = |
"Sws_spinifex_0cm QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m3/m3" |
| int | Sws_spinifex_0cm_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"Sws_spinifex_0cmQC flag" |
| _Netcdf4Dimid = |
0 |
| units = |
"none" |
| double | Sws_spinifex_100cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath spinifex grass, 95-105 cm depth" |
| ancillary_variables = |
"Sws_spinifex_100cm QC flag" |
| valid_range = |
"0,1" |
| coverage_L3 = |
"99" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m3/m3" |
| diurnalcheck_numsd = |
"[10]*12" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_spinifex_100cm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Sws_spinifex_100cmQC flag" |
| units = |
"none" |
| double | Sws_spinifex_10cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath spinifex grass, 10-20 cm depth" |
| ancillary_variables = |
"Sws_spinifex_10cm QC flag" |
| valid_range = |
"0,1" |
| coverage_L3 = |
"99" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m3/m3" |
| diurnalcheck_numsd = |
"[5]*12" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_spinifex_10cm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Sws_spinifex_10cmQC flag" |
| units = |
"none" |
| double | Sws_spinifex_60cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil water content beneath spinifex grass, 55-65 cm depth" |
| ancillary_variables = |
"Sws_spinifex_60cm QC flag" |
| valid_range = |
"0,1" |
| coverage_L3 = |
"99" |
| standard_name = |
"soil_moisture_content" |
| coverage_L4 = |
"99" |
| coverage_L5 = |
"99" |
| units = |
"m3/m3" |
| diurnalcheck_numsd = |
"[3]*12" |
| rangecheck_upper = |
"[1]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Sws_spinifex_60cm_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Sws_spinifex_60cmQC flag" |
| double | Ta [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Air temperature (HMP) at 9.81 m height" |
| ancillary_variables = |
"Ta QC flag" |
| valid_range = |
"-10,50" |
| coverage_L3 = |
"100" |
| standard_name = |
"air_temperature" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| rangecheck_upper = |
"[50]*12" |
| rangecheck_lower = |
"[-10]*12" |
| int | Ta_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"TaQC flag" |
| units = |
"none" |
| double | Tpanel [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"CR3000 datalogger panel temperature" |
| ancillary_variables = |
"Tpanel QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| int | Tpanel_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"TpanelQC flag" |
| _Netcdf4Dimid = |
0 |
| units = |
"none" |
| double | Ts [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Element-wise average of series Ts_spinifex_0cm" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Ts QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_temperature" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Ts_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"TsQC flag" |
| units = |
"none" |
| double | Ts_grass_100cm_b [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil temperature under inter-mulga grass, 100 cm depth" |
| ancillary_variables = |
"Ts_grass_100cm_b QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_temperature" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| int | Ts_grass_100cm_b_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Ts_grass_100cm_bQC flag" |
| units = |
"none" |
| double | Ts_grass_50cm_b [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil temperature under inter-mulga grass, 60 cm depth" |
| ancillary_variables = |
"Ts_grass_60cm QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_temperature" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| int | Ts_grass_50cm_b_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"Ts_grass_50cm_bQC flag" |
| _Netcdf4Dimid = |
0 |
| double | Ts_mulga_0cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil temperature under mulga, 0-10 cm depth" |
| ancillary_variables = |
"Ts_mulga_0cm QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_temperature" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| int | Ts_mulga_0cm_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"Ts_mulga_0cmQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | Ts_mulga_100cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil temperature under mulga, 100 cm depth" |
| ancillary_variables = |
"Ts_mulga_100cm QC flag" |
| coverage_L3 = |
"0" |
| standard_name = |
"soil_temperature" |
| coverage_L4 = |
"0" |
| coverage_L5 = |
"0" |
| units = |
"C" |
| int | Ts_mulga_100cm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Ts_mulga_100cmQC flag" |
| units = |
"none" |
| double | Ts_mulga_10cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil temperature under mulga, 10 cm depth" |
| ancillary_variables = |
"Ts_mulga_10cm QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_temperature" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| int | Ts_mulga_10cm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Ts_mulga_10cmQC flag" |
| units = |
"none" |
| double | Ts_mulga_60cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil temperature under mulga, 60 cm depth" |
| ancillary_variables = |
"Ts_mulga_60cm QC flag" |
| coverage_L3 = |
"0" |
| standard_name = |
"soil_temperature" |
| coverage_L4 = |
"0" |
| coverage_L5 = |
"0" |
| units = |
"C" |
| int | Ts_mulga_60cm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Ts_mulga_60cmQC flag" |
| units = |
"none" |
| double | Ts_spinifex_0cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil temperature under spinifex, 0-10 cm depth" |
| ancillary_variables = |
"Ts_spinifex_0cm QC flag" |
| coverage_L3 = |
"99" |
| standard_name = |
"soil_temperature" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| int | Ts_spinifex_0cm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Ts_spinifex_0cmQC flag" |
| units = |
"none" |
| double | Ts_spinifex_100cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil temperature under spinifex, 100 cm depth" |
| ancillary_variables = |
"Ts_spinifex_100cm QC flag" |
| coverage_L3 = |
"0" |
| standard_name = |
"soil_temperature" |
| coverage_L4 = |
"0" |
| coverage_L5 = |
"0" |
| units = |
"C" |
| int | Ts_spinifex_100cm_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"Ts_spinifex_100cmQC flag" |
| _Netcdf4Dimid = |
0 |
| units = |
"none" |
| double | Ts_spinifex_10cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil temperature under spinifex, 10 cm depth" |
| ancillary_variables = |
"Ts_spinifex_10cm QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"soil_temperature" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| int | Ts_spinifex_10cm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Ts_spinifex_10cmQC flag" |
| units = |
"none" |
| double | Ts_spinifex_60cm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Soil temperature under spinifex, 60 cm depth" |
| ancillary_variables = |
"Ts_spinifex_60cm QC flag" |
| coverage_L3 = |
"0" |
| standard_name = |
"soil_temperature" |
| coverage_L4 = |
"0" |
| coverage_L5 = |
"0" |
| units = |
"C" |
| int | Ts_spinifex_60cm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Ts_spinifex_60cmQC flag" |
| units = |
"none" |
| double | Tv [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Virtual temperature at 1167 cm height" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Tv QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"virtual_temperature" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Tv_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"TvQC flag" |
| units = |
"none" |
| double | Tv_CSAT [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Virtual air temperature (CSAT)" |
| ancillary_variables = |
"Tv_CSAT QC flag" |
| valid_range = |
"0,50" |
| coverage_L3 = |
"73" |
| standard_name = |
"virtual_temperature" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"C" |
| rangecheck_upper = |
"[50]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | Tv_CSAT_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Tv_CSATQC flag" |
| units = |
"none" |
| double | Tvp [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Virtual potential temperature at 1167 cm height" |
| instrument = |
"not defined" |
| ancillary_variables = |
"Tvp QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"air_potential_temperature" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | Tvp_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"TvpQC flag" |
| double | VPD [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Vapour pressure deficit at 9.81 m height" |
| instrument = |
"not defined" |
| ancillary_variables = |
"VPD QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"water_vapor_saturation_deficit_in_air" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | VPD_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"VPDQC flag" |
| units = |
"none" |
| double | Vbat [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Battery voltage" |
| ancillary_variables = |
"Vbat QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"V" |
| int | Vbat_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"VbatQC flag" |
| units = |
"none" |
| int | Wd_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"WdQC flag" |
| double | Wd_CSAT_Compass [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Wind direction (CSAT)" |
| ancillary_variables = |
"Wd_CSAT_Compass QC flag" |
| coverage_L3 = |
"99" |
| standard_name = |
"wind_from_direction" |
| coverage_L4 = |
"99" |
| coverage_L5 = |
"99" |
| units = |
"deg" |
| int | Wd_CSAT_Compass_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Wd_CSAT_CompassQC flag" |
| units = |
"none" |
| double | Wd_CSAT_Sd [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Standard deviation of wind direction (CSAT)" |
| ancillary_variables = |
"Wd_CSAT_Sd QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"deg" |
| int | Wd_CSAT_Sd_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Wd_CSAT_SdQC flag" |
| units = |
"none" |
| double | Wd_WS [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Wind direction (Wind Sentry) at 8.28m" |
| ancillary_variables = |
"Wd_WS QC flag" |
| coverage_L3 = |
"0" |
| standard_name = |
"wind_from_direction" |
| coverage_L4 = |
"0" |
| coverage_L5 = |
"0" |
| units = |
"deg" |
| int | Wd_WS_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Wd_WSQC flag" |
| units = |
"none" |
| double | Wd_WS_Sd [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Standard deviation of wind direction (Wind Sentry) at 8.28m" |
| ancillary_variables = |
"Wd_WS_Sd QC flag" |
| coverage_L3 = |
"0" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"0" |
| coverage_L5 = |
"0" |
| units = |
"deg" |
| int | Wd_WS_Sd_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Wd_WS_SdQC flag" |
| double | Ws [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Wind speed (CSAT), merged from Ws_CSAT" |
| ancillary_variables = |
"Ws QC flag" |
| coverage_L3 = |
"99" |
| standard_name = |
"wind_speed" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m/s" |
| int | Ws_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"WsQC flag" |
| units = |
"none" |
| double | Ws_CSAT [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Wind speed (CSAT)" |
| ancillary_variables = |
"Ws_CSAT QC flag" |
| coverage_L3 = |
"99" |
| standard_name = |
"wind_speed" |
| coverage_L4 = |
"99" |
| coverage_L5 = |
"99" |
| units = |
"m/s" |
| int | Ws_CSAT_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Ws_CSATQC flag" |
| units = |
"none" |
| double | Ws_CSAT_Sd [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Standard deviation of wind speed (CSAT)" |
| ancillary_variables = |
"Ws_CSAT_Sd QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"m/s" |
| int | Ws_CSAT_Sd_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Ws_CSAT_SdQC flag" |
| double | Ws_WS [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Wind speed (Wind Sentry) at 8.28m" |
| ancillary_variables = |
"Ws_WS QC flag" |
| coverage_L3 = |
"0" |
| standard_name = |
"wind_speed" |
| coverage_L4 = |
"0" |
| coverage_L5 = |
"0" |
| units = |
"m/s" |
| int | Ws_WS_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Ws_WSQC flag" |
| units = |
"none" |
| double | Ws_WS_Sd [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Standard deviation of wind speed (Wind Sentry) at 8.28m" |
| ancillary_variables = |
"Ws_WS_Sd QC flag" |
| coverage_L3 = |
"0" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"0" |
| coverage_L5 = |
"0" |
| units = |
"m/s" |
| int | Ws_WS_Sd_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"Ws_WS_SdQC flag" |
| _Netcdf4Dimid = |
0 |
| units = |
"none" |
| double | albedo [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"solar albedo" |
| ancillary_variables = |
"albedo QC flag" |
| coverage_L3 = |
"18" |
| standard_name = |
"surface_albedo" |
| coverage_L4 = |
"18" |
| coverage_L5 = |
"18" |
| units = |
"unitless" |
| int | albedo_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"albedoQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | dTs [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Element-wise average of series dTs_spinifex" |
| instrument = |
"not defined" |
| ancillary_variables = |
"dTs QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"C" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | dTs_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"dTsQC flag" |
| units = |
"none" |
| double | dTs_mulga [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"30-min change in surface soil temperature under spinifex" |
| ancillary_variables = |
"dTs_mulga QC flag" |
| coverage_L3 = |
"99" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"99" |
| coverage_L5 = |
"99" |
| units = |
"C" |
| int | dTs_mulga_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"dTs_mulgaQC flag" |
| units = |
"none" |
| double | dTs_spinifex [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"30-min change in surface soil temperature under spinifex" |
| ancillary_variables = |
"dTs_spinifex QC flag" |
| coverage_L3 = |
"99" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"99" |
| coverage_L5 = |
"99" |
| units = |
"C" |
| int | dTs_spinifex_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"dTs_spinifexQC flag" |
| units = |
"none" |
| double | e [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"atmospheric vapour pressure (HMP) at 9.81 m height" |
| ancillary_variables = |
"e QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"water_vapor_partial_pressure_in_air" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"kPa" |
| int | e_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"eQC flag" |
| units = |
"none" |
| double | esat [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"saturation vapour pressure (HMP) at 9.81 m height" |
| ancillary_variables = |
"esat QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"kPa" |
| int | esat_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"esatQC flag" |
| double | eta [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Horizontal rotation angle" |
| instrument = |
"not defined" |
| ancillary_variables = |
"eta QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"87" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"87" |
| coverage_L5 = |
"87" |
| units = |
"deg" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | eta_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"etaQC flag" |
| units = |
"none" |
| double | ps [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Atmospheric pressure" |
| ancillary_variables = |
"ps QC flag" |
| coverage_L3 = |
"100" |
| standard_name = |
"surface_air_pressure" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"kPa" |
| int | ps_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"psQC flag" |
| units = |
"none" |
| double | q [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Specific humidity at 9.81 m" |
| instrument = |
"not defined" |
| ancillary_variables = |
"q QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"specific_humidity" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"kg/kg" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | q_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"qQC flag" |
| units = |
"none" |
| double | qsat [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Saturated specific humidity at 9.81 m" |
| instrument = |
"not defined" |
| ancillary_variables = |
"qsat QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"100" |
| standard_name = |
"not_defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"kg/kg" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | qsat_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"qsatQC flag" |
| units = |
"none" |
| double | rSm [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| InputSeries = |
"FeTaAhpsWsFnFsdFgVPDwA" |
| instrument = |
"not defined" |
| FeCutoff = |
0.0 |
| ancillary_variables = |
"rSm QC flag" |
| height = |
"not defined" |
| long_name = |
"Canopy resistance from Penman-Monteith inversion, Allen/Jensen formulation, L3, L5" |
| standard_name = |
"not defined" |
| coverage_L3 = |
"24" |
| coverage_L4 = |
"24" |
| coverage_L5 = |
"39" |
| units = |
"s/m" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| FsdCutoff = |
10.0 |
| int | rSm_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"rSmQC flag" |
| units = |
"none" |
| double | ram [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| InputSeries = |
"FeTaAhpsWsFnFsdFgVPDwA" |
| instrument = |
"not defined" |
| FeCutoff = |
0.0 |
| ancillary_variables = |
"ram QC flag" |
| height = |
"not defined" |
| long_name = |
"Aerodynamic resistance from drag coefficient, Allen/Jensen formulation, L3, L5" |
| standard_name = |
"not defined" |
| coverage_L3 = |
"40" |
| coverage_L4 = |
"40" |
| coverage_L5 = |
"39" |
| units = |
"s/m" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| FsdCutoff = |
10.0 |
| int | ram_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"ramQC flag" |
| units = |
"none" |
| double | rhod [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| instrument = |
"not defined" |
| ancillary_variables = |
"rhod QC flag" |
| height = |
"not defined" |
| long_name = |
"Density of dry air" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"kg/m3" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | rhod_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"rhodQC flag" |
| units = |
"none" |
| double | rhom [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| instrument = |
"not defined" |
| ancillary_variables = |
"rhom QC flag" |
| height = |
"not defined" |
| long_name = |
"Density of moist air" |
| standard_name = |
"air_density" |
| coverage_L4 = |
"100" |
| coverage_L5 = |
"100" |
| units = |
"kg/m3" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | rhom_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"rhomQC flag" |
| units = |
"none" |
| double | theta [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Vertical rotation angle" |
| instrument = |
"not defined" |
| ancillary_variables = |
"theta QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"87" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"87" |
| coverage_L5 = |
"87" |
| units = |
"deg" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | theta_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"thetaQC flag" |
| double | u [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Longitudinal component of wind-speed in natural wind coordinates" |
| instrument = |
"not defined" |
| ancillary_variables = |
"u QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"87" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"87" |
| coverage_L5 = |
"87" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | u_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"uQC flag" |
| units = |
"none" |
| double | uA [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Covariance of u and H2O (7500)" |
| instrument = |
"not defined" |
| ancillary_variables = |
"uA QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"73" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"g/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | uA_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"uAQC flag" |
| units = |
"none" |
| double | uC [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Covariance of u and CO2 (7500)" |
| instrument = |
"not defined" |
| ancillary_variables = |
"uC QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"73" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"mg/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | uC_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"uCQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | uT [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Covariance of u and T (CSAT)" |
| instrument = |
"not defined" |
| ancillary_variables = |
"uT QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"73" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"mC/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | uT_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"uTQC flag" |
| units = |
"none" |
| double | u_Sd [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Longitudinal velocity component from CSAT, standard deviation, rotated to natural wind coordinates" |
| instrument = |
"not defined" |
| ancillary_variables = |
"u_Sd QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | u_Sd_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"u_SdQC flag" |
| double | uscalc [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| instrument = |
"not defined" |
| ancillary_variables = |
"uscalc QC flag" |
| height = |
"not defined" |
| long_name = |
"ustar from (Fh,Ta,Ah,p,u)" |
| standard_name = |
"not defined" |
| coverage_L5 = |
"100" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | uscalc_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"uscalcQC flag" |
| units = |
"none" |
| double | ustar [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| diurnalcheck_numsd = |
"[5]*12" |
| instrument = |
"not defined" |
| valid_range = |
"0,2" |
| ancillary_variables = |
"ustar QC flag" |
| height = |
"not defined" |
| long_name = |
"Friction velocity: Raw uncorrected, rotated to natural wind coordinates, frequency response corrected, Friction velocity: Raw uncorrected, rotated to natural wind coordinates, frequency response corrected, merged from ustar, uscalc" |
| standard_name = |
"not defined" |
| coverage_L3 = |
"71" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"100" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| rangecheck_upper = |
"[2]*12" |
| rangecheck_lower = |
"[0]*12" |
| int | ustar_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"ustarQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | uu [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Variance of u" |
| instrument = |
"not defined" |
| ancillary_variables = |
"uu QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | uu_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"uuQC flag" |
| units = |
"none" |
| double | uv [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Covariance of u and v" |
| instrument = |
"not defined" |
| ancillary_variables = |
"uv QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | uv_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"uvQC flag" |
| units = |
"none" |
| double | uw [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Momentum flux X component, rotated to natural wind coordinates, frequency response corrected" |
| instrument = |
"not defined" |
| ancillary_variables = |
"uw QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | uw_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"uwQC flag" |
| units = |
"none" |
| double | v [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Lateral component of wind-speed in natural wind coordinates" |
| instrument = |
"not defined" |
| ancillary_variables = |
"v QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"87" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"87" |
| coverage_L5 = |
"87" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | v_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"vQC flag" |
| units = |
"none" |
| double | vA [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Covariance of v and H2O (7500)" |
| instrument = |
"not defined" |
| ancillary_variables = |
"vA QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"73" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"g/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | vA_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| long_name = |
"vAQC flag" |
| _Netcdf4Dimid = |
0 |
| double | vC [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Covariance of v and CO2 (7500)" |
| instrument = |
"not defined" |
| ancillary_variables = |
"vC QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"73" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"mg/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | vC_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"vCQC flag" |
| _Netcdf4Dimid = |
0 |
| units = |
"none" |
| double | vT [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Covariance of v and T (CSAT)" |
| instrument = |
"not defined" |
| ancillary_variables = |
"vT QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"73" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"73" |
| coverage_L5 = |
"73" |
| units = |
"mC/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | vT_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"vTQC flag" |
| units = |
"none" |
| double | v_Sd [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Lateral velocity component from CSAT, standard deviation, rotated to natural wind coordinates" |
| instrument = |
"not defined" |
| ancillary_variables = |
"v_Sd QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | v_Sd_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"v_SdQC flag" |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| double | vv [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Variance of v" |
| instrument = |
"not defined" |
| ancillary_variables = |
"vv QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | vv_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"vvQC flag" |
| units = |
"none" |
| double | vw [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Momentum flux Y component, rotated to natural wind coordinates, frequency response corrected" |
| instrument = |
"not defined" |
| ancillary_variables = |
"vw QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | vw_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"vwQC flag" |
| units = |
"none" |
| double | w [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Vertical component of wind-speed in natural wind coordinates" |
| instrument = |
"not defined" |
| ancillary_variables = |
"w QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"87" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"87" |
| coverage_L5 = |
"87" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | w_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"wQC flag" |
| double | wA [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Kinematic vapour flux, rotated to natural wind coordinates, frequency response corrected, WPL" |
| instrument = |
"not defined" |
| ancillary_variables = |
"wA QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"g/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | wA_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"wAQC flag" |
| units = |
"none" |
| double | wC [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Kinematic CO2 flux, rotated to natural wind coordinates, frequency response corrected, WPL" |
| instrument = |
"not defined" |
| ancillary_variables = |
"wC QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"mg/m2/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | wC_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"wCQC flag" |
| units = |
"none" |
| double | wT [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Kinematic heat flux, rotated to natural wind coordinates, frequency response corrected, converted from virtual heat flux" |
| instrument = |
"not defined" |
| ancillary_variables = |
"wT QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"mC/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | wT_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"wTQC flag" |
| units = |
"none" |
| int | w_Sd_QCFlag [time=17520, latitude=1, longitude=1] |
| units = |
"none" |
| _Netcdf4Dimid = |
0 |
| long_name = |
"w_SdQC flag" |
| double | ww [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"Variance of w" |
| instrument = |
"not defined" |
| ancillary_variables = |
"ww QC flag" |
| height = |
"not defined" |
| coverage_L3 = |
"71" |
| standard_name = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"71" |
| units = |
"m2/s2" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | ww_QCFlag [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| long_name = |
"wwQC flag" |
| units = |
"none" |
| double | zeta [time=17520, latitude=1, longitude=1] |
| _Netcdf4Dimid = |
0 |
| coverage_L3 = |
"71" |
| ancillary_variables = |
"zeta QC flag" |
| height = |
"not defined" |
| long_name = |
"stability coefficient, (z-d)/L, stability coefficient, (z-d)/L, zeta from gapfilled L" |
| standard_name = |
"not defined" |
| instrument = |
"not defined" |
| coverage_L4 = |
"71" |
| coverage_L5 = |
"100" |
| units = |
"m/s" |
| serial_number = |
"not defined" |
| missing_value = |
-9999.0 |
| int | zeta_QCFlag [time=17520, latitude=1, longitude=1] |
| long_name = |
"zetaQC flag" |
| units = |
"none" |
| int | crs |
| inverse_flattening = |
"298.257223563" |
| grid_mapping_name = |
"latitude_longitude" |
| long_name = |
"WGS 1984 datum" |
| longitude_of_prime_meridian = |
"0.0" |
| semi_major_axis = |
"6378137.0" |